How can i mend my qualcast hedge trimmer GHT600A1?

the blades on my electric qualcast hedge trimmer GHT 600A1 have stopped working although the motor is running.

done

How can I mend my Qualcast hedge trimmer?

How do I put my Qualcast hedge trimmer back together

done

Hedge trimmer not working?

I have a qualcast cordless 18v pole hedge trimmer, MOE-16ET 410. Battery fully charged but there is no power to the trimmer.

done

How can I replace the cable on my Qualcast hedge trimmer?

How can I replace the cord on my 600W Qualcast hedge trimmer as I have accidentally sheared through this last week. Is this expensive and should I cut my losses and invest in a new trimmer? Perhaps ... more

done

Does the gear section need grease or lubricating?

I have a Qualcast HTEG 55A corded hedge trimmer, , the blades spin, but do not cut the hedge. I have removed the plastic cover at the base of the handle- cleaned out the grease and leaves etc. What ... more

done

Replaced drive belt ?

Replaced drive belt on qualcast 380 hedge trimmer but it keeps slipping off and cutting into housing

done

how can i repair my pullstart please?

hi i have a qualcast petrol hedgetrimmer slk26a and the pull start assembly was broken and an attempt at repair by previous owner has left it with no springs attached but i do have them.please advis ... more

done

How remove case on Qualcast 600w hedge trimmer?

Yep you guessed it .... cut the cable :-( Need to get inside case for proper repair. Cannot get it apart ... removed 5 obvious screws plus handle and 1 screw under handle but case will still not se ... more

done

I have a Qulacast Hedge trimmer which runs but the blades are loose?

I have a Qualcast Hedge Trimmer which normally is great. Now though, the blades have come loose and it does not cut. I have tried tightening the bolts on the blade but that does not work. is there s ... more

done

how can i fix my qualcast 600w hedge trimmer?

when i released the trigger the motor ran on but the blade stopped running and i had to disconnect the power supply to halt the motor

done

steel arm on qualcast diagram?

where does the metal strip locate on Qualcast switch box

done

rewiring a qualcast hedge trimmer 380 ?

After cutting the wire whilst hedge cutting, I rewired the black and brown wires into the junction box back according to instructions. It still doesn't work and feel I may have joggled the wires at t ... more

done

How can I fix qualcast hedge trimmer?

Hedgemaster 380 works intermittently. Brushes not worn. Commutator ok. Works when held vertically stops when lowered to horizontal

done

blade lubrication?

I have just purchased a new Qualcast 450W Hedge trimmer, with no instruction manual. (I'll ask Homebase to get me one next week). a. What is the correct type of (machine?) oil to apply to the cutt ... more

done

how or where can i fix trimmer?

I have a qualcast hedge trimmer the motor runs and blades move but it does not cut?

done

Qualcast Suffolk Punch 35DL?

hello can someone please tell me what the engine size is in a Qualcast Suffolk Punch 35DL

done