can I fix my singer 9410 stitch length control?

My 47 yr. old Singer model 9410 will not adjust the stitch length. It stays the same no matter where I set the length. What can I do?

done

singer touch tronic 2010?

I have done all these steps and my machine will still not thread the bobbin.I dont understand what I am doing wrong can someone please help im new to using a machine im use to sewing by hand

done

How do I complete button hole on Singer Touch Tronic 2010?

After attaching button hole foot and selecting 7 or 8 on touch screen. When I start the process the machine starts the end of the button hole and one side (long), once it gets to the other end it won' ... more

done

How can I fix my Singer Stylist free arm Model 834 ?

The thread from the bobbin is not being picked up. I"ve checked to make sure it is threaded correctly and that thread is in bobbin case correctly. I've cleaned out dust and lint, looked through the ma ... more

done

How do I remove hand wheel on a Singer 427?

I inherited a Singer 427 and it needs a new motor belt. However I can't seem to be able to find a way to remove the hand wheel. Am really stuck :( Help!

done

Vintage Singer 201K smouldering/sizzling motor!!?

I am new to vintage sewing machines and have recently got a Singer 201-2K, knee lever operated electric machine. This afternoon I have been happily piecing a baby quilt on it. All was going well un ... more

done

after removing the capacitor, the footpedal gets hot and smoking?

I have a Singer 631g. I removed the capacitor. The machine runs fine, but after one hour, the footpedal started being hot, and there after there was that special smell. Is there another capacitor, ... more

done

how do we replace upper vertical shaft gear #163987?

We have a Singer T&S Special Zig Zag model 648 bought in 1970. The upper vertical shaft gear has been ground down and runs rough and will not turn the bobbin. There are two part nos., 163328 and 16398 ... more

done

my 774 singer sewing machine started clunking??

I took apart top looks like a screw is missing from main rod to gears? and the bobbin case is binding now after I cleaned it?

done

How do you fit a new gear to a Singer 427 sewing machine?

Hi The bobbin mechanism has stopped working and I have discovered that the lower of the two nylon gears (top of machine) of my usually very trusty (bought new in 1973) Singer 427 has broken and miss ... more

done

how to fix power cord on singer 237?

trying to replace power cord and foot control cord

done

The thread breaks frequently. ?

In My Singer sewing machine the thread breaks down frequently. How to stop this problem?

done

How to fit a replacement timing gear on Singer 449?0?

The vertical gear on my Singer 449 has crumbled with age and I have bought a replacement, but I am now faced with the task of actually fitting it and then adjusting the timing. Is anybody able to offe ... more

done

Singer model 1130 main drive wheel very stiff ?

Hello, my machine was working just fine and then the main drive wheel became very stiff, causing the machine to sew at a tortoise pace and then stop. It is almost impossible to turn the crank wheel as ... more

done

Foot pedal problems with singer inspiration 4206?

When foot pedal on my singer inspiration 4206 model is plugged in the machine takes off and will not stop until unplugged. Problem with foot pedal or machine itself? This is a relatively new machine ... more

done

Sewing Machine-Singer Touch Tronic 2010?

The bobbin case won't wind. I've never had a problem with it before. It seems as if the thread is not catching below the bobbin case and is not winding around it. Is there a specific part problem? ... more

done

how do i time the singer 237?

I have problems with skipped stitches

done

413 singer is out of timeing?

Had to take bobbin carrier out of machine. had to take belt off and forgot to mark the timing. the machine had been stored in a barn. and was full of dirt. the machine was seized and wouldn't move. it ... more

done

Test a Singer Featherweight 221 without pedal?

Is there a way I can "hotwire" a Singer Featherweight 221 using just a power cable with a wall plug on one end and wire on the other (meaning, which two of the three prongs on the Featherweight do I c ... more

done

How can I remove the bobbin holder assembly of my 319k singer?

My old singer sewing machine has jammed. Thread is caught inside the assembly holder, I think that is what it is called, I have removed the bobbin and the foot plate but can't see how to take it apart ... more

done