Singer 257 vertical arm shaft and gear replacement?

How do you remove and replace the vertical arm shaft and gear in the Singer Model 257? That is, what needs to be removed to get to it?

done

How can i engage the drive of my Singer 427?

I have tried to tighten the Hand wheel knob on my Singer 427, but it does not tighten against the Pulley Wheel. Has anyone a drawing of the parts, in case one has mislaid.

done

how to replace the vertical shaft gear in a singer 247 sewing machine. ?

I bought a vintage sewing machine and am trying to get it functional again. It was sewing great after new belts and oil but the vertical gear stripped and I noticed that all of the plastic gears are r ... more

done

Tension/stitch problems with my Singer 201?

My Singer 201 sewing machine has been sewing beautifully - until today. For no apparent reason the bobbin stitch sews fine on the surface, but the underneath is a mess of loose threads and stitches. E ... more

done

Arme shaft gear on Singer 257?

I have the gear to replace the broken one. It seems the old one is pinned in, and it seems I will have to remove the whole upper parts to pull shaft from above. Is that true, or is there some othe ... more

done

Singer 413 service manual?

Can anyone help. Looking for a service manual for the Singer 413.

done

Singer 438 machine will not stop?

My wife's machine started to work without foot control being used. Tried all the suggestions bought new parts, capacitator,resistor and still no differens. Took all parts out and left connected to pow ... more

done

how do you open a singer motor control?

I need to repair a singer controller model number 103453-009 , it has only one removable screw which I have removed but the unit remains closed.

done

Hi, my singer 514 dos are not moving?

Hello, Singer 514, I have just acquired this lovely old machine, I have given it a good clean and de-fluff but the material does not feed through and the dogs are not moving either. they do not move w ... more

done

Do I need a new Singer sewing motor controller?

Hi, I have just used my old singer sewing machine, and whilst I was sat there, without my foot on the motor controller, the machine started running on its own. I unplugged the foot controller and it s ... more

done

needle replacement singer 427 sewing machine?

Hi, my Singer 427 started looping underside of fabric, then the needle broke. Replaced the needle as far up as it can go, but the needle hits something when it goes down and can't do a full circumfere ... more

done

How to repair my singer futura 250. ?

I sent the embroidery unit to be repaired and the service tech said my machine must not be working correctly. Could it be in the software? Is there a way for me to fix this myself?

done

how to replace the bobbin case on a Singer Genie 353?

The bobbin case was taken out to clean and now it doesn't go back in. When it is in, the machine will only stitch for a few stitches before the bobbin gets tangled. I don't think the bobbin case is c ... more

done

Foot pedal not controlling?

Connected new pedal but sewing machine still running continually. My machine is a singer

done

Singer 834 gears --How to change?

My machine apparently only needs conical mid-machine gears. How do I change those?

done

I have a singer stylist 466 that won't complete a stitch?

My stylist 466 was working and I put it up. Today I got it out and it won't complete a stitch. It seems to hit something either forward or backward when I try by hand to make it work?

done

how to thread a singer 5528 sewing machine?

how to thread a singer 5528 sewing machine

done

smoking singer motor controller?

My wife has a Singer and, like previous questions, it has started to smoke. Removing the suppressor is your recommended fix, but which is it? Opening the pedal, there are two small fuse-like units on ... more

done

Singer foot controller part no 196469 detached wires?

Singer foot controller part no 196469. Some of the wires on the part of the foot controller that plugs into the sewing machine the white connection ( not the end that plugs into mains electricity) ... more

done

set timing on my singer 196k205 ?

How to set the timing on my singer 196k205 industrial sewing machine, i replaced the hook & base and now i dont know how to set the timing to get it to work properly

done