Current leak?

This is also on DIY tools but thoough here too fore motoer electricians at a guess would be reading. Used in my garage/workshop Works sharp WS2000 USA import horizontal grinder/sharpener through ... more

done

Installed new pull down light switch?

This is the Australian type switch HPM10 with a swing toggle and am not sure what position the toggle should be in once I put the cover back on? HELP!

damaged 13 amp cable?

can damaged cable on cutting back to good conductors be fitted to a fused D.P box then new cable run from that to the sockets. To fully replace will mean fishing because cable route is in attic ar ... more

Fuse type change?

Cost of changing Wylex wire fuse carriers to push fit MCB's in 8way C.U. Can't afford the cost of new C.U. Open clear plain wall eye level CU not in a cupboard. parking no problem private drive ... more

Lost Neutral?

13amp. two double two single sockets the plug in tester shows power and earth lights but no neutral. Have tested one of the sockets using tester screw driver and the live obviously lights but so does ... more

How do I find the correct Wireless Bell Push?

I have 2 Wireless Bell Receivers(plug in type) but no Bell Push. I have no makers name only Type ST-885M & frequency 433.92MHz on the Receiver. Please can you help.

done

No heating?

My thermostat is reading off how do iget it to work and get heating on I haver hot water

done

Garage Electrics?

I plan to refurbish the existing electrics in my garage.The buried cable is from bungalow CU 15amp wire fuse I may change this to a 30amp subject to advice given. The garages existing is 13amp ring ... more

Can I cut an outside t.v. ariel without getting a shock?

My very old t.v. ariel has been taken down so that it can be thrown out. The wire that comes through the brick wall is still attached to the ariel. Is it safe to simply cut through this wire, withou ... more

done

Hot water & room temperature thermostat danfoss?

Need help! My temperature dial for my heating has fallen off ( this is the main that turns to switch heating on and controls temperature) its a simple dial (model- danfoss) housing association council ... more

belle mixer won't turn off?

i got this belle mixer at an auction cheap, it works fine and the switch is ok but it won't switch off, it looks like someone has by- passed the capacitor? but not sure

done

masterp;ug digital programmable 7 day timer - instructions are missing?

Does anyone have the instructions for the masterplug digital programmable 7 day timer

done

More than one time?

Can you set this timer for more than one time to come on and off a day

done

What fuse wire?

What fuse wire should used in house ring main. Always had 15 amp but card says 30amp

done

aerial sockets in other rooms?

I have just got installed a new aerial into my new built down stairs flat,I have installed it to the aerial socket in the sitting room,when i attached it there was aerial cable in the wall socket whic ... more

Exention cable?

UK so talking 13amp. (30amp circuit) Four way inline extension cable bought from Asda's today. Plugged it in to power socket on wall switched on the extension inserted TV plug no problem, inserted t ... more

done

How to fix a surge protector that popped, US plugged into Europe outlet?

I have a Dynex 11-Outlet PC Home/Office surge protector (DX114241) that I brought to Germany and it was plugged into a wall outlet using an adapter. The adapter was not a converter. The protector popp ... more

done

Plug socket switch won't turn off?

Hi, One of my plug socket of my 4 plug sockets in 1 just won't turn off. The only way to turn it off is to unplug it from the main socket. It is not much of a problem as the "malfunctioning" socket i ... more

done

The light on my immersion is staying on?

Have just recently replaced an immersion switch and the light iz staying on. I had a red and black in that i connected to a matching live and neutral on the switcb. I then connected the outgoing black ... more

done

Megger MFT 1552?

what is a fair price for unused Megger MFT1552 and "Socket & see "CB100 self calibration unit both with probes and cables still in sealed bags so assume both tools/units have not been used not bee ... more

done