Frister and rossman model 35 timing?

how to time a frister and rossman model 35

done

NM902 thread gets cut frequently?

Thread gets cut frequently

How can I mend my Signature model UHT J283A?

I have recently gotten a Signature model UHT J283A sewing machine and I believe it is missing the bobbin case and the piece that holds the bobbin case. Is there any way to fix this or anywhere that I ... more

done

Presser foot is loose?

singer 9217 presser foot lifter is moving free, but the foot is not moving up or down

done

Timer problems? Frister+ Rossmann 45 M3?

Hi , I have inherited a Frister Rossmann 45 Mark 3 on which the previous owner says 'the timer has gone'. It responds to the foot peddle but starts to slow down almost immediately. Any advice grateful ... more

how to fix a Thread take up lever Brother sewing machine XL-2120?

Hello , one of my kids started my machine and I found out that the bobbin and thread up lever had got a problem. For the bobbin it couldn't easily get out and a brush like structure had moved up close ... more

Bobbin shuttle?

The needle is being caught on the bobbin shuttle of my Bernina 740. Is this something I can easily fix myself?

done

Frister Rossmann light bulb?

I have just bought a new machine 6434 but it has a LED light which I can't find a switch or other way to disable. Does anybody know how to access the bulb, can I take that out and the machine still wo ... more

done

How to open foot pedal?

I have an old singer zig zag 457 and a sickly foot pedal I have the new capacitor to change but not sure how to get into the pedal any help greatly appreciated. Claire

Service manual for Delta NM902/AEG 795/Yamata FY2300?

I'm looking for a service manual or repair manual for this machine. I have seen it bear these different names and models: Delta NM902, AEG 795, Yamata FY2300. The problem is that the elastich stitc ... more

Adjust feed dogs?

The feed dogs only reach a maximum of 0.68mm high and sit 3.5 mm from front of throat plate resulting in poor fabric feed and short stitches .how do I adjust these

done

bobbin case loose in shuttle new home hf106?

Hi there, I removed the shuttle and bobbin case to get out thread. Now when I put it back together the bobbin case won't stay in place. Can somebody email me a copy of the manual? I would really appr ... more

done

Frister Rossmann Beaver 4 wont move needle for zigzag?

We have oiled where you're supposed to, but the machine will only see straight and reverse. The needle is positioned to the right of the foot but will not move from this position to zigzag. How can w ... more

Can I quilt with my Lervia KH4000 sewing machine?

Hello, In the manual it doesn't say anything about quilting, but I know many people start quilting with an average, no specific quilting machines and there're special generic quilting feet to add t ... more

Sewing machine, Lervia KH4000?

Hi, I only used this machine for a couple of short jobs years ago and some months ago I've started to use it regularly, however, I've experienced lots of problems sewing denim as the piece of fabri ... more

Jones 942 zigzag machine?

I have a Jones 942 zigzag machine that isn't grabbing the bobbin cotton can you help or tell me where i can get instruction manual please.

done

How do I realign the needle position on my Jones 641 sewing machine?

realign the needle position on my Jones 641 sewing machine it's gone to the left and is only just missing the plate. I don't know much about this sewing machine as I don't have a manual it belonged to ... more

done

My New Home Memory Craft 6000 won't run?

When I switch it on, the bulb lights up, but the function doesn't work. I tried moving the on/off rocker switch, left the machine for a day, then when I switched it on again it worked fine for a coup ... more

How can I fix myToyota 4500el ?

After turning on my machine it makes a short noise and then 3 lights start flashing. Also the hand wheel does not move

Fritter Rossman Beaver 2?

I took the tension knob off to oil behind and now cannot reassemble properly