How can I mend stuck hand wheel frister rossman panda 6 mk2?

Hello I have a question for Frister Rossman Panda 6 MK2, the hand wheel is not working it’s stuck even if I turn the clutch off! At first it’s very okay but later on the running become slower and ... more

done

Hiw do I get my empisal 550 to do zigzag?

Empisal 550 sewing machine stopped doing zigzag stich

How can I mend my Kenmore Zig Zag Sewing Machine?

The Hand Wheel on my Sears Kenmore Zig Zag Sewing Machine Model 15814301 won't move. I had the machine serviced over a year ago. Perhaps a new belt is needed? Thank You, Pat

How do I time a bernina 740 machine?

How do I time a bernina 740 sewing machine?

done

Singer 201 went bang , smelt and now won’t work?

I am trying to mend my Mothers sewing machine It’s a Singer 201 in a folding table cabinet serial number EA142404 I have used it extensively in the past and it’s a great machine I plugged it i ... more

done

Janome DC2010 sewing machine feed dog issue?

I have a Janome DC2010 sewing machine. I switched the feed dog lever to drop the feed dogs and now the lever won't work to bring them up again.

Remove thread caught on shaft Bernina 807 Minimatic?

Bernina Minimatic 807. I have thread caught on the shaft behind the bobbin raceway. I am hesitant to start unscrewing at random to get to the area--there are several screws around, but some appear fac ... more

How can i fix my kenmore ultra stitch 6?

the wheel spins but the needle doesn't rise and fall

Jones VX860?

My Jones vx860 model has just been serviced but now I cannot get the needle to work, using hand wheel it goes down to a point then stops and will not move.

done

How can I mend my Pfaff 1222?

Pfaff 1222 open arm sewing machine has a thread is stuck in bobbin case. A small piece is sticking out near the top but I cannot pull it out or manually turn the wheel. Any ideas to get to pull it ou ... more

Veritas 9000A5 cobbles underneath?

Veritas 9000A5 sewing machine.Will not stitch smoothly elastic on to material. Cobbles up underneath

How do I replace my Gimbels Needle?

How do I replace my Gimbels Needle? Model 767-B

Lervia 4000 won't zigzag stitch?

My Lervia 4000 sewing machine won't zigzag stitch, it continues to stitch in a straight line. I have tried changing the needle and cleaned the mechanisms etc. Is it a timing issue? If so can someone p ... more

How can I fix my frister rossmann cub 7?

I have a Frister Rossmann cub 7. It's stitch selector has gone stiff half way across, if I select a stitch in the last 5 stitches it sews in reverse and does not form the stitches properly. Help ple ... more

Denim sewing with empisal 4d overlocker?

Can i sew denim with my empisal 4d overlocker? Thank you Yvette

Elna 2004SP questions?

Are people just throwing these Elna 2004SP sewing machines away, or are they posting to a different website ? No questions since 2010 ?

Needle not moving?

Frister Rossmann 66 Motor turns but needle doesn’t move, is it a stretched belt and if so is it simple to repair?

Brother NX200?

feeder teeth on Brother NX200 will not lift.

Putting bobbin case into jl100?

How do I replace the bobbin case in my JL100 sewing machine

Lervia KH4000?

I have been given a Lervia KH4000 and have threaded the bottom bobbin successfully, then I push the wheel in to revert to normal sewing and the wheel will not move - any suggestions please?