18hp Briggs engine is burning to much fuel and smells?

We have a 18hp twin cyl briggs mower engine on a countax mower and its burning at least 1-1/2 gallons of fuel extra a day. Its not the float as this operates and the oil is clean. Do you have any s ... more

done

How can I fix my Countax K14?

My Countax K14 Ride on Mower will not start! I have tested the starter motor on the bench and it works perfectly. I thought it may have been the starter solenoid so replaced it, that didn't work eithe ... more

done

countax rider 30 cutting deck?

Can anyone tell me how to remove the cutting deck in order to sharpen the blade on my countax rider 30 ride on mower?

done

Countax C800 no power uphill?

My Countax C800 works ok on the level but slows right down uphill. It seems to get have less power the longer I use it until it will no longer go uphill at all. I wondered if the drive belt had stret ... more

done

Removing rear wheel on a countax ?

Hi I have a Countax K14 with a nackered tyre but the wheel seems to be seized on the shaft although it doesnt loo to corodid has anyone any tips for removal ? Many thanks Roger

done

Countax C600H Servicing Requirements?

I bought an elderly (9 year old) C600H garden tractor a year ago to keep 2 acres of rough pasture in hand. The condition of the tractor is excellent and I'd like to keep it that way. I've 'phoned Coun ... more

done

countax C300H- how do you adjust the parking brake?

countax C300H- how do you adjust the parking brake?

done

Can I repair a countax C300H transaxle?

My Countax C300 seems to have a major transaxle problem. It will not go up even the slightest incline but is OK on the flat. The drive belt to the transaxle is fine but it seems that the hydrostatic d ... more

done

Countax Rider 30 pulleys and belts?

I have just put a new sump gasket on my Rider 30, and I need to know the system of belts and pulleys. I've put it together but it doesn't look quite right. Does anyone know where I can get a diagram ... more

done

Countax C600H lawn tractor - melting fuses but not blowing?

My Countax C600H lawn tractor keeps melting the fuses, but not blowing them. I have checked the brake switch and the seat switch which is where the manual suggests to check. These are both fine. The c ... more

done

How can I reset the service required indicater on My Countax C600H?

My countax C600H is out of warranty and I wish to serevice it myself. The'S' Service required indicator is flasing in the parking brake display. How can I reset this please on the PCB memory Thank ... more

done

What does the flashing 'C' mean on a Countax C300?

I have a Ride On, 'C' keeps flashing on dash board, no manual available, help.

done

What's red flashing "S" on countax ride-on mean?

Countax C/A series garden tractor. (Fairly old abused and knackered, but still going strong despite sheer neglect!) Got a red flashing "S", or maybe a "5", on the dash below left of the hour meter. It ... more

done

How to get the service light off on a K series countax?

My servise light has come on and i need to know how to get it off. Would you be able to tell me how to solve this instead of me having to go to the main dealer? My model is a K 1850 many thanks.

done

How do you remove the drive pulley from a B&S Vanguard 16hp ohv engine?

I'm swapping the engine in my Countax C500HE tractor, it has a B&S Vanguard 16hp ohv engine, but I can't see how to remove the drive pulley short of brute force and heat! Are there any hidden bolts or ... more

done

Countex ride on, hydrostatic stopped, are reconditioned ones avail?

My Countax was working fine, reversed out then started makig awful noise in gear box, put new drive belt on, went fine then started noise again and jammed, have been told that hydrostatic unit is faul ... more

done

I have a Countax Rider 30 with a 11.5 hp Briggs and Stratton engine?

I have a Countax rider 30 with a 11.5 hp Briggs and Stratton engine. It runs fine for about an hour then cuts out and wont restart for a couple of hours, Has anyone any idea what the fault can be?

done

Countax Rider manuals needed?

I have a Countax Rider that is always going wrong. It is a hydrostatic drive model. I have a user manual which is useless, and cannot find an electronic copy of the parts list or workshop manual. ... more

done

countax garden tractor smoking belt!?

I have pulled the lever to de tension the belt but its the top belt that goes around the four wheels that is loose and when i try to engage the cutters it just clicks but nothing happens apart from sm ... more

done

countax gearbox problem?

Hi I have a countax rider 30 step through on mower all five forward gears work fine but when reverse is selected it goes nowhere and makes a grinding noise, sounds like the teeth of the cog has gone ... more

done