temperature sensor?

where i can get new temp. sensor for laminator Rexel lv250hs

How do you change the fuses in the GBC Pinnacle27?

How do you change the 2 fuses in the GBC Pinnacle27. I know where the one is for the power button but cannot locate the 2 thermal fuses. They say the are on the right side end of laminator but I just ... more

gbc ultima 65 laminator film wrinkling?

When I run copy paper through the laminator the my paper comes through with wrinkles on it. What can be causing this. I checked the tension and cleaned the rollers. Could it be caused by static?

GBC 4250 Blows 1A 250V SloBlo under right cover?

This machine was gifted to my church from a local school. They said they took it to a repair shop to get it fixed and the guys there told them it couldn't be fixed and they should buy a new one for $ ... more

What is the temperature rating for the thermal fuse on a gbc4250 laminator?

What is the temperature rating for the thermal fuse on a gbc 4250 laminator

Laminitor is not heating up?

We have a ARL2700 Roll Laminator. All functions appear to be working correctly except it will not heat up. Lights come on, rollers roll, stone cold.

GBC Pinnacle 27 EZLoad laminator shows Er2 on control panel display ?

We have Pinnacle 27 EZLoad laminator that shows Er2 on control panel display. Laminator will not run. What does Er2 code mean? Thanks for your help.

the machine shows the red light on, buy that's all. the machine does not ?

work at all. How can I fix this?

done

gbc laminator425 lm?

I just changed the film on our GBC Laminator for the first time. When I turn it on it gets hot, but rollers will not roll. Please tell me that I didn't break it.

How do I remove a pouch jam from my Rexel laminator?

My rexel laminator has a pouch jammed in it, I cannot see the pouch and it will not reverse either, how do I get it out

Why won't the rollers turn on the Pinnacle 27?

After reloading the film and pushing the start button, the rollers that advance the film aren't turning. The roller that pushes the laminated material out the back of the machine IS turning (the two ... more

Ultima 65 has a scream, what can we do?

Our Ultima 65 has a scream that keeps getting louder, had been intermittent, but is now continuous. Laminate seals well, no other problems, smells like it might be running a little hot. A new heat tub ... more

My puller rollers are not turning?

The puller rolls will not turn. I did take off a side cover and the chain and gears are moving, but not the rollers. I can physically turn the rollers.

Pinnacle 27 not heating?

Our Pinnacle 27 is not sealing the documents. When we try to turn the temp up it goes to like 20

GBC Lamiator stopped working?

I have a GBC Ultima Laminator and during a big job, it just stopped working, light are not on, I have tried changing outlets and checking our schools breaker box. The laminator is just dead in the wa ... more

Ultimate 65 laminator will not turn on and reset don't work. what wrong?

I have an Ultimate 65 laminator its not quiet a year old. We had a roll back jam. The film is removed from the rollers but now it will not come on. I the reset button does nothing it will not flip ... more

How to un-jam my EZload Laminator?

Laminated items have rolled round inside the machine and now won't come out even when i try to use reverse button.

Not clamping?

When I turn my accubind on it sits there and warms up, once it does all the lights come on and I have to shut it off and retry it again, some times it works and other times it does the same thing.

Laminator gbc ultima 65 How to reinstall a power switch?

I had a wire burn out to the power switch and it burned a post off the switch. I have purchased a new switch and I need to know how to re wire it. GBE ultima 65 laminator.

done

Ultima 65 Laminator?

My front rollers roll in reverse but will not roll in forward gear. Any ideas?