How can I replace broken plastic gear on Singer touch-tronic?

Singer touch-tronic 2010 memory machine? The plastic gear broke and I cannot move the bar over far enough to slip the new one in place. I loosened up all the other gears so the 2 bars can freely move, ... more

Crown zig zag sz 207ED3?

Crown zig zag will only zig zag even though setting to straight.

Sewing machine starts on its own?

Why does frister and Rossman beaver 4 sewing machine starts sewing without pressing foot pedal

done

How do I mend my Toyota RS2000 series A LCD?

My Toyota RS2000 series A LCD When I turn the dial to a different stitch, the LCD shows the correct stitch but the needle arm does not move and stays on a straight stitch. Can you please help me

How can I mend my sewing machine?

Ho do I Move needle position on model 45

Parts spares?

Hi Does znybody know where/how to get spare parts (pcb) for brother compal galaxie 870 ... Thanks

done

Frosted and Rossmann beaver 9 sewing machine?

Hi the reverse button on my friater ans Rossmann beaver 9 doesn’t work - any ideas how to fix ? Thankyou

Can I use foot controller?

singer 1920 model 66 red eye the foot control ceramic substrate is crack will the foot controller operate properly. Should I glue the substrate or get new controller?

How do fill a bobber?

Kenmore Ultra-Stitch 6 158-1340281 How do I fill a bobber

done

Sew-tric ltd variable speed motor built 1982 6000rpm r007327?

Hi there I have inherited a SEW-TRIC LTD VARIABLE SPEED MOTOR built 1982 6000rpm R007327 which needs new brushes and securing bolts - any advice please? Thanks David

done

Frister Rossmann Quilter 681C?

Frister Rossmann Quilter 681C needle hits retainer under bobbin case holder. (breaking needles) Is it the timing? how do I adjust it? No repair manuals available despite internet search. Instruction b ... more

Singer zigzag 457 Stylist not threading bobbin/making stitch?

Singer Model 457 zigzag Stylist will not thread bobbin. The gears on the long bar on the top both turn; the gears on the long bar underneath both turn. The timing has been reset. What can it be preven ... more

done

Hand wheel turning hard?

My hand wheel is turning hard. When I loosen screw it is turning correct but needle does not move. What can I do to let my needle move efficiently.

Sewing machine issue?

Bobbin winder spinning but cotton not winding Lervia kh4000

done

How to switch on light of sewing machine?

How to switch light on frister and rossman model 35

done

Treadle Problem?

My Singer 115 treadle machine goes backwards faster than for

Presser foot level, needle and thread guide have fallen out?

Hi anyone HELP I have been trying for two hours to reassemble the needle cotton thread guide and the presser foot lever and the screw at the side I cannot put back together I am obviously not do ... more

done

Tension units compatible?

My Beaver 3 tension unit has fallen out is the Beaver 2 unit compatible?

done

Singer 507?

my singer sawing 507 machine starts to move when I turn the machine on without using the peddle and there is a burning smell. Any clues? I've had for a while and just noticed the fuse was 3a but sho ... more

done

1965 Singer 275k sewing machine foot pedal?

1965 Singer 275k sewing machine foot pedal? machine runs at full power when plugged in. Foot pedal is a brown Style J 230V. Singer foot controller. Any help would be appreciated. PA

done