How can I repair my Craftsman circular saw model #315.27802?

How can I repair my Craftsman circular saw model #315.27802. It is getting really intermittent in starting when I pull the trigger switch. I havbe looked up the switch availablity on the Sears webs ... more

done

gOODMANS W282NS?

Left on stand by all night. No power this morning. Checked mains fuse no problems. Took back of found another fuse "t2ah" could this be the problem if so how do i purchse and where from or could it be ... more

done

How can I fix the teeth on my Black n Decker Drill?

I have a keyless chuck on my black and decker drill, but all 3 teeth are at different heights. How can I fix it ?

done

how can i fix my dewalt batteries?

I have a dewalt 14.4V drill. The batteries are not more than a year old. The batteries have much less power and dont last near as long as they used to. Is there any way of fixing the cells without ... more

done

Where can I get replacement for battery in Skil Twister #2207?

Where can I get replacement for battery in Skil Twister #2207? The NiCad battery in the Skil Twister will no longer take a charge.

done

I have a Stayer SC271 and have a wood burning smell?

When using my saw I get bad a wood burning smell. I have only used the saw say 12 times since purchase. Could it be the blade or something else. Any help would be appreciated. Thank you

done

The screw has become jammed in my electri scredriver--how can I remove it?

Black and Decker VP720 battery powered screw driver. The ejectable screw is lodged in the chamber, and I can't get it out

done

i need brushes?

i have a handi circular saw and i need to know where to get replacement brushes

done

ryobi palm sander?

trigger acts like its notworking all the time

done

how can i fix my black and decker h552?

i have a drill bit stuck in my drill and the chuck key wont turn. ive tried putting it in a vice and using a wrench to try and turn it. PLEASE HELP.

done

How can I fix my dewalt 7 1/4 circular saw?

My saw spins but when it comes in contact with what is being cut, it catches and stops. The bolt in the middle which holds the blade in place still spins at the speed the blade should be spinning at. ... more

done

how do I remove frozen blade bolt?

I have an old Porter Cable circular saw and the blade bolt is frozen and won't come off....and the saw has no place to "lock" the motor shaft so I can break loose the blade bolt. How can I remove the ... more

done

My Kirby Heritage ll needs to be re wired from switch /to motor?

The heritage 2 was having some problems switching on and off, until one of my helpful house guests, removed the cover ,switch and all wires that go to the motor and lights ,switches ...the works and ... more

done

How can I change the chuck on my Ryobi 430W drill with cord?

I'm having trouble removing the chuck from my Ryobi drill (about 10 years old, 430W, model details and manual lost, 3/8 inch chuck key, chuck made in Germany, maximum bit capacity 10 mm, with electric ... more

done

Electric power drill, Black & Decker?

I have an electric drill that's loosing power. How do I fix this?

done

How can I fix my Goodmans W282NS-T TV?

My Goodmans W282NS-T widescreen tv has suddenly stopped working. When you turn it on you can hear the High voltage on the tube for a second or two but then just shuts down into standby mode. Does anyo ... more

done

How can I put my Black & Decker electric screwdriver back together?

I took this screwdriver apart and the parts inside the front end fell apart...gears, metal pieces, etc...so I need to find a diagram showing me how to reassemble the screwdriver, particularly the fron ... more

done

How does one service a keyless chuck on a drill?

Everytime that you use a Bosch drill to drill a hole in a masonry wall and it gets dust into the chuck it is a struggle to loosen the chuck. How can one clean it and what can be done to prevent this ... more

done

my circular saw needs new brushes and/or bearings?

the manuals say to check these parts and replace them if necessary, but they do not give instructions how to do this how is this done? i have a 6.5 in skil saw model 534 It is an older model can I ... more

done

Repace electronic speed selector on Black and Decker drill H552 400watt mod?

The top mounted speed selector on my drill does not affect the motor speed. Can I replace this myself? If so, how do I identify the part number?

done