Where can I get we brushes for my power base saw?

Require carbon brushes for my power base saw. Model number 801745 Motor 1200 Voltage 220/240V 50Hz Serial Number 0058 112

Inventek spiral saw instructions ?

Could I have a copy of the instructions please if not too much trouble

rexon chop saw blows fuses?

hi my rexon DM 2500AL started sparking at the brushes excessively now it trips the house RCD when attempt to start any suggestions would be welcome mike

done

My PWR1750CSA electric chain saw has stopped working?

The chain saw was working perfectly well until it got stuck whilst sawing a branch. The cogs rotate but the spindle doesn't move

fixing a loose handle on a circular saw?

the handle on my circular saw is loose, I disassembled the handle and saw two screws holding the handle on one tightened nicely, the other one would not tighten, it was like there was nothing there

Challenge 1200W MCS 5025 ?

Need help to reassemble

macallister lithium battery . MCULi-60?

Charger packed up for no apparent reason. Would appear charger is obsolete . Does anyone have one to sell or suggest as to what may be wrong with it?

done

how to fit carbon brushes?

Wolf 6kg SDS hammer drill 1500 watt ref. 102054 how do I remove and replace the carbon brushes and springs into the plastic holders

inventec spiral saw manual?

hi does any one have a manual for an inventec spiral saw, that I could have a copy of please

Fitting a safty guard?

Can anybody advise as to how to refit a safety guard for a Performance Compound Mitre saw FMTC2555MS. I mistakenly removed the wrong screw and the spring has come out and I cannot see how it goes bac ... more

bell 110v cement mixer?

does not run when I take my finger off the on button this is a new switch.

Overheating belt sander?

I have had a Ryobi EBS-8021V Belt Sander for several years - good tool it has been. Yesterday the motor sound changed; the machine became VERY hot; and I found flakes of plastic inside the drive belt ... more

fixing a belt sander?

carbon brushes for parkside pbsd 600A1 belt sander

done

carbon brushes?

where can I get carbon brushes for a PRS1500 table saw. they are15x15x 6 mm

done

Makita Jig #4304T Blade installing Lever does not seem to work?

Makita Jig model 4304T: blade installing lever does not open blade clamp. Is there something wrong or broken with this top ?

done

my anglegrinder blows fuses?

every time I try to start my angle grinder it blows the fuse

Fix switch?

The problem is the drill only motions I'm reverse.. What ways an I fix this drill without ordering replacement parts?? DeWalt 885 impact drill..

Where can l purchase a manual for this saw?

Performance 254mm table saw FMTC 10 TSL 230v 50hz 1500w where can I purchase a manual for this machine.

where can i get spare parts?

i have an aldi workzone angle grinder gear set that has broke.where can i get a new gear set

i am trying to replace a broken gear set ?

the angle grinder is an 1150 w workzone from ALDI.Can you explain where i can could get a replacement gear set from.RSVP

done