Kawasaki ER5 Speedo Tacho complete unit?

Does any have a complete speedo tacho unit for sale my bike was knocked over and the unit is beyond repair. Alternatively how do you remove the plastic trip winder?

done

no drive at all qualcast 43s mower?

i have a qualcast mower fitted with a kawasaki engine which is not supplying any drive to the roller or blades i am assuming that there is a linkage problem from the motor -any suggestions

kawasaki kz650c2 1978?

above m/c missfiries on low revs ,tic over is quarter turn more to make it tic over and run as a result black plugs ,run rich.if i drop revs it wouldnt statrt or run.litrlary tried everything ,it stil ... more

done

how to fix my kawasaki hedge trimmer khd 600b?

the machine has not been used for 2 years.the fuel tank was run dry after last use.the cylinder was lightly oiled,engine turned over plug replaced finger tight.0n filling the tank prior to use the fue ... more

done

how do i fix my kawasaki vulcan 1500?

My vulcan starts, runs, idles, etc... but when i engage a gear, with or without the clutch, nothing happens! It seems the gearbox is almost nonexistant, or somehow detatched from the engine. How do i ... more

done

how can I fix my kawasaki TG24??

I have a kawasaki TG24 strimer model no:Al-K024KL been a good runner and started great I have got spark but it won't start, any suggestions please.

how can I fix my kawasaki TG24??

I have a kawasaki TG24 strimer model no:Al-K024KL been a good runner and started great I have got spark but it won't start, any suggestions please.

done

how can i convert my manumatic kawasaki fury 125 into manual clutching ?

how can i convert my manumatic kawasaki fury 125 into manual clutching

done

Transmission problem 93 Kawasaki KLF400?

shifting from reverse to first the trans.. went into netural and will not go into any gear now I can see the shift lever move the shaft going in to the trans moving but nothing happens and the cable f ... more

i snapped off a head bolt how do i remove it?

how do i remove the part that is still in the head it is a john deere f725 front end mower it has a kawasaki motor 590

done

How do I fit an exhaust gasket to Kawasaki Ninja properly?

I have just got the correct gasket and was told that it melts in position. Is there a set order in what to do, ie: fit then bolt up, run engine then tighten or do you just leave alone. Help please

kawasaki er500 head gasket?

2007 low mileage,coolant level in tank dropped from between low to high by about 25mm,there is a tiny ammount of white in the oil we drained off,engine was running fine but noticed steam coming from e ... more

done

How can I fix my Kawasaki kx 125?

The spark plug has a spark and it has engine oil in it

done

How much front fork oil do i need - Kawasaki gpz1100E1?

How much oil (and Grade) per leg or distance from top without spring and compressed? Thanks

done

new strimmer head needed?

bump feed nylon strimmer head for my golden star brush cutter. it is a rather old model (kfs4v) with a kawasaki tg 18 petrol engine.

Kawasaki spares?

Looking for a flywheel for a Kawasaki strimmer KBL27A, anyone know any breakers.

John Deere JX75 burns oil?

The push mower has a Kawasaki 6hp fc150v engine, it starts and burns oil till warm then quits burning it. Could this be the head gasket or piston rings

done

kawasaki tg18 carb gasket?

hi there where will i get a gasket for the above regards geoff

done

the digital display on a 1984 kawasaki vouager isn't working ?

how do i fix the digital display on a kawasaki voyager

kawasaki tg18 brush cutter?

where are the two mixture screws located - i can only find one