how do I replace a Internal light?

how do I replace a Internal light in a BEKO Freezer

How do I change the capacitor on my Beko DPU8360W tumble dryer?

The drum on my Beko tumble dryer is not turning, and I think the capacitor is not working. How do I get access to the motor to change the capacitor? Thanks, John

Excess rinse aid use?

The machine is a Beko 5412. It is using far more rinse aid that it used to, despite the control being turned down to minimum. I have had the dispenser out and cleaned it up and suspect the issue is ... more

Beko DE6340S dishwasher ?

Changed both top and bottom spray arm + the top draw spray arm feeding hose. Top spray arm not spinning at all, so today changed the water inlet valve, as that's what went wrong about 2yrs ago. But al ... more

How to factory reset a Beko WTG841B1W?

Hello my Beko washing machine needs to be reset. No matter what program I select it only turns the drum for a couple of seconds then stops for a while & does the same again a few times then program en ... more

done

How can I install a beko HCC64103 cooking hob?

How can I connect a 5 cable wire to a beko electric cooking hob

done

Beko DWD 5410 W on/off switch not working?

The button is not staying clicked in, thus no power to the machine. Do I just need a replacement button at £2.50 or a complete electrical unit? If just the button is this easy to fix? If a rep ... more

done

Door will not open?

We have the Beko Tall Larder Fridge which in general works very well but of late the door will not open properly. It is ok if going to the Fridge after a while but, if you return within a short period ... more

done

How can I fix my BEKO Slimline DE 2431 FG?

The dishwasher has black residue coming into the dishwasher, seemingly from the waste removal system. What do I need to do to fix this?

done

error code 1520 on beko excellence ?

wont drain or last spin,,trips electric is this an expensive fix beko excellence washing machine

Opening back of BEKO tumble dryer?

What type of screwdriver do I need to open the back of my BEKO DCX711005 tumble dryer

done

Beko DRCS68W No lights on panel but light on inside?

I thought the fuse was gone as it was inoperable. Nothing happens when I switch it on. No front panel lights at all. However, when I open the door the internal light is on, so power is getting through ... more

done

My Beko washer is stuck on a wash and showing 8108?

My Beko digital display washer WM8127W is stuck on a program it wont allow me to change it shows 8108 what can i do

done

beko drct 70w condenser dryer?

just stopped workin.cant find reset.cleaned filters.

how can i fix my Beko WMA 1512 Washing Machine ?

Whatever programme I use it starts okay but then stops about halfway through, before the rinse cycle. There is a low hum sound when it stops. The water intake filter is clean. The drum and the drain ... more

What is code 1520 on Beko Washing MachineWMB81241 ?

I close the door and machine should start. but it doesn't. the lock is not activated, Fitted a new electric door lock. worked once then not again. did a reset and get 1520 in the screen.

Beko fridge freezer making ice but not droppping into the box?

I have a Beko fridge freezer GNEV320S. The ice maker is making ice but it is not dropping it into the ice bucket. Water keeps coming to make more ice making a large slab of ice in the bucket. I have r ... more

de2542fw?

hi Beko de2542 unit switch on , pumps out at the start and then goes into wash mode fine, but the quick wash is now been on for more than an hour and is still going, it will not move onto the ... more

Beko WME7267W won't clear E05 error or enter test mode?

After dismantling and cleaning pump and connecting rubber tubes, door seal and detergent tray, etc. I've put everything back and attempted to do reset by closing door, holding down start and turning p ... more

Beko wma745w timer doesn’t advance?

The clock shows the time remaining and, no matter what program I select, it only counts down 1 minute then stays, with the machine doing whatever it should at that time. The control board is working, ... more

done