a creda excel condencer tumble drier no heat ?

ichanged both stats it is now heating but not hot enough to dry the cloths.iam told the stats are correct for the machine .could it be the element that needs replacing

done

INSTRUCTIONS NEEDED PLEASE?

I need to get hold of the instructions for a CREDA 1000 SUPERSPIN washing machine. I just need to know how to do a basic wash of coloureds at normal temp. Thanks

done

Creda Tumble Dryer 37747. No Heat?

Hi Taking advice from previous posts on this subject, I tried the paper-clip trick on the left thermostat. It gave a loud click so I presumed it had reset successfully. However, still no heat. Oth ... more

done

How do I replace the belt on my Crusader(Creda)37667 condenser?

I have managed to buy the replacement belt but am at a loss to know how to replace it. I have taken the back off and there is a spindle which the belts seems to go over but I don't know how!! Does any ... more

done

E2 fault code on BF72?

i get E2 fault code on my Creda/Hotpoint BF72 dishwasher. The manual says this is due to the level safety device tripping. Does anyone know how to reset the trip? cheers

done

how do i refix front of door on creda europa solarplus cooker?

the glue holding the bottom of the front cover of the door to the mainoor frame has failed and the fronnt is hanging loose. what sort of fxative should i use?

done

how can I fix the start button on my creda t620cw?

The start button on my Creda Condenser Tumble Dryer won't stay in - needs replacing.Does anyone know how to do this? How do I gain access behind the front panel without causing damage?

done

How can I fix Creda Europa Solarplus?

How do I get to the illumination unit behind the control panel on the Creda Europa Solarplus double oven, Model No 48164. There is no panel backlight when the controls are used.

done

No heat from my creda T622CW?

My tumble dryer is going round but the heating side of it is not working is their any way i can check out the thermal cut out switches or the heater elements

done

How can I fix/replace the button/clock module on a Creda 46108?

I've tried Creda Spares Dept, but no luck there, so anybody here know where I can get a complete buttons/clock module for the Creda 46108 Corniche? The oven light button has stuck in, and the clock f ... more

done

How do I replace the door hinge on my Creda Excel tumble dryer?

I have a replacement for the bracket that fixes to the body of the machine but don't know how to fit it. The bracket has two Phillips screws, but the guy in the shop told me there is a fixing plate i ... more

done

How can I fix my Creda storage heater?

I have an old (c1982) 2.5kW Creda storage heater. It has power to all elements, but does not heat up or appear to draw any current (judging by meter disc rotation). Any suggestions on what to test or ... more

done

how can I service a washing machine (creda excel 1200)?

Not a how to fix question, more preventative maintenance! Could somebody please tell me is there any type of service that I can perform eg belts, greasing etc Thanks

done

SPARES FOR A CREDA TUMBLE DRYER?

I AM IN SOUTH AFRICA. WHERE DO I BUY SPARES FOR A CREDA REVERSAIR TUMBLE DRYER? I NEED THE DRIVE BELT.

done

How to fit a belt to a tumble dryer Creda Reversair No 37742?

CREDA REVERSAIR TUMBLE DRYER. MODEL NO. 37742 BELT Machine in pieces at the moment, drum off front, belt slipped onto motor spindle and through runners but keeps slipping out as we rotate the drum. ... more

done

creda reversaire makes a screehing noise when operating?

how do i resolve the problem of a high pitch noise when the tumble drier is going

done

How can i fix my Creda simplicity T530vw tumble dryer?

My tumble dryer is splurting out lots and lots of fluff whenever it is on. It is covering my kitchen! We clean the filter out after every use, but there seems to be no end to the amount of fluff that ... more

done

Creda Storage Heaters?

I have two Creda storage heaters that are not working, I have replaced the fuses and still nothing!. Any advice?

done

how do i replace the drivebelt on a creda tumble drier?

creda tumble drier spec 37543 , six groove belt snapped no other damage as far as i can see. how do i get the replacement onto the drum, pulleys and drive 'axle' ?

done

how do i fix a tumble dryer?

my creda tumble dryer is blowing cold air rather than hot air what could be the problem

done