Macdee concealed cistern?

I have the opposite problem with this cistern where it won't flush unless I hold the button down until it empties. Any ideas?

Macdee DVE 0600?

How to stop it continuing leaking

Macdee flushing system?

I have a Macdee flushing system.. hydraulic with long thin plastic pipe. Concealed in vitreous cistern. It has one flush silver button on front. It has yards of this plastic pipei inside and it i ... more

How do I remove A derwent macdee flushing chamber?

My toilet wont flush, the flushing mechanism seems to be housed inside a plastic chamber, it says Derwent macdee on a little blue lid on top. I cant seem to get access to this as it seems a sealed uni ... more

water is over filling into the toilet basin?

My macdee - afv40100 cistern is over filling with water how can I stop this ?

How to replace a Derwent Macdee 1 Piece Cistern?

I have a derwent macdee cistern. it is part of a hideaway cistern which is behind a timber panel. how can i get this out to replace it, i have little access to the flush pipe (is this were it disconne ... more

where can I buyflush button?

Where can I buy replacement flush button for macdee arcadia valve afv40100/afv40200 madee only showing full valve.Is there an alternative I could use ?.

done

My toilet wont flush?

I have a derwent macdee cistern that wont flush help.

done

dearwent toilet seat buffers (4)?

I need 4 toilet seat plastic buffers for my Derwent Macdee toilet seat. The seat has a lid and the colour is cream and it is about 12 years old.

My Derwent Macdee Concord flushing tank has cracked in the frost. ?

What type of glue will adhere to this type of plastic to repair it? It has cracked at the flushing arm point on the tank. There are so many glues around and I'm sure that there is one, but which?

My Derwent Macdee 9,5" flush system flow is low?

I checked the membrane and appears Ok. The flow is very low. Actually there is no "flush". The mechanism is so simple that I would accept that this models do not flush but let a small quantity to flow ... more

to fix a macdee close coupled toilet?

it takes aprox half an hour to fill and a slight leak running down the inside of the toilet

done

How do I make watertight connection between copper plumbing and plastic cis?

Macdee toilet cistern inlet valve is to be connected to existing copper house plumbing, but no washers or olives are supplied and joint leaks. How is this to be corrected?

done

derwent macdee metro 3-part syphon range wont flush?

i put my hand under syphon range flushed toilet and black rod brings up the diaphram in side and there is no flush

done

Removing Macdee flushing system?

Hello all, can anyone tell me if it is possible to remove the MacDee Syphon without separating the cistern from the pan? Really don't want to do this if I can avoid it! Many thanks for any help yo ... more

done

How can I fix my Macdee flush valve?

Water constantly leaking into pan. Have taken apart and cleaned etc. to no avail. Have checked Macdee website but can't find my particular model (WRAS AFV40100 AFV40200). Am really fed up with usin ... more

Can Macdee DV0600 float valves handle mains presasure > answer = not always?

I have 3 WC's with macdee dv0600 float valves fitted, all have had problems. The house is only 18 months old. The builder is completely N.F.I saying its a maintenance issue. The house has a mains p ... more

removing the syphon?

I need to remove the syphon from my toilet to get to the screw underneath because its leaking,a book I read says there is a large nut underneath, but there is not, does the syphon just lift out, It is ... more

done

how can i fix my cistern MACDEE WRAS AFV40100 it want refil?

my macdee cistern will not refil , water is constantly running through to the toilet bowl. help

done

how can i fix my. derwent macdee metro 3part syphon range ?

broken flush handle the the white nylon part which fixes to the flush handle. DERWENT MACDEE METRO 3part syphon range