How can I repair a Qualcast Cobra 32?

How can I fix the cut height adjustment which does not click and hold in position. How can I remove the cover over the mechanism?

How to replace drive belt on qualcast power team 400?

How to replace drive belt on qualcast power trak 400

How can I fix my Qualcast RE30X?

Whilst mowing it hit a stone and now although there is power, the blades are not turning. Please help

Qualcast 1300 MEB1334M Can sheared off bolt holding blade be replaced?

Qualitative 1300 MEB1334M. A hidden old rotary washing line base completely sheared off the bolt holding the blade. Can this bolt be replaced?

done

Switches itself off qualcast?

When switched on it runs for 30-45 seconds then cuts out, if I leave it for a few minutes I can restart it only to repeat the process.

cutting height qualcast easi-trak 32?

How do I alter the cutting height on the Qualcast easi-trak 32 ? F016506042

done

Qualcast Bosch Concorde 32 motor mower?

Motor goes, but cutting cylinder not turning. If drive belt, how do you get to it? What else could it be? Thanks

setting timing on a qualcast diplomat 350e?

Whilst stripping down the engine on my qualcast diplomat petrol engine mower, I was just about to mark the timing position when the cam shaft came out of its housing, are there any timing marks to ali ... more

Qualcast cpm35 petrol cylinder lawnmower will not drive?

Because my mower blades would not drive I fitted a new drive belt, this has made no difference .I can move the cutters by turning the pulley by hand

How remove case on Qualcast 600w hedge trimmer?

Yep you guessed it .... cut the cable :-( Need to get inside case for proper repair. Cannot get it apart ... removed 5 obvious screws plus handle and 1 screw under handle but case will still not se ... more

done

Qualcast rotivator?

I bought a qualcast rotivator from Hombease a couple of years ago. Earlier this summer it was working fine. Now even though the engine is running ok the blades stop turning under even the lightest loa ... more

diameter of rollpin?

What diameter is the roll pin which holds the pulley on a qualcast elan32 electric lawn mowerr

no drive at all qualcast 43s mower?

i have a qualcast mower fitted with a kawasaki engine which is not supplying any drive to the roller or blades i am assuming that there is a linkage problem from the motor -any suggestions

Where does the spring lever go in my Qualcast easitrak 32 mower ?

Where does the spring lever go in the switch box of my Qualcast 32easitrak mower, it fell out when I undid the box.

how do i change the drive belt on qualcast re30x?

how do i change the drive belt on qualcast re30x

How do I rewire my Powertrak 4000?

Unfortunately I have cut the power wire when mowing my lawn. My mower is a qualcast Powertrak 4000

done

ignition fault no spark 3043 qualcast ?

no spark qualcast hq-pt 3043 grass strimmer

I have a Qulacast Hedge trimmer which runs but the blades are loose?

I have a Qualcast Hedge Trimmer which normally is great. Now though, the blades have come loose and it does not cut. I have tried tightening the bolts on the blade but that does not work. is there s ... more

done

Qualcast Classic 43S?

Roller Blades do not disengage roller is locked when you try and pull it back

where does the metal strip fit?

where does the metal strip fit and connect to inside the handle switch assembly of a qualcast concorde 32 electric lawnmower

done