Where can I get a part?

I have a qualcast 1993 suffolk punch cylinder mower. I am unable to secure a replacement gasket that locates between the carburretor float bowl and the carburretor body. I believe the engine is an atc ... more

done

The gear knob has come off?

I have a Qualcast EP30 electric lawn mower and noticed the gear knob has come off how to put it back please

the cutter blade on my mower is not working?

the cutter blade on my qualcast classic petrol s35 mower is not rotating.possible break in the linkage to the drive

done

TECHUMSE RECOIL REPAIR KIT?

WOULD LIKE DIAGRAM TO REASSEMBLE THE ABOVE , FOR QUALCAST MOWER.

Qualcast 35s petrol?

I have cleaned spark plug put new petrol and oil in cleaned carbarator but will kick over once and die any idea on were the fuel adjuster is and what setting should be ,/ thanks in advance for any hel ... more

Qualcast 35 s no spark at the plug ?

The 35s I have has been laid for a number years and I tried to get it to go today - I am not getting a spark at the plug - I took the plug out and held it against the engine with the HT lead attached ... more

done

How do I replace a drive belt on an Atco Windsor 12 cylinder mower?

How do I put a new toothed belt onto the pulleys attached to electric motor and pulley that in turn drives the blades and roller. Do I have to remove the bearings to get it over the larger pulley? At ... more

done

Qualcast 43s Cylinder mower(suffolk punch)?

I am looking for an engine manual to service this for a friend. There are no identifying marks for the engine- I am unsure of the brand, ?Kawasaki. Do you have any links to the engine manual, please? ... more

done

qualcast 23E strimmer?

how do i change the spool/line

slipping drive belt on a qualcast turbotrak 35?

Is it possible to tension the drive belt on my turbotrak 35 or is the only solution to replace it

Suspected defective electric motor on Qualcast Power Trak 4000 mower?

My Qualcast Power Trak 4000 electric mower has ceased to work. I suspect that either the electric motor is finished or the carbon brushes are worn out. The is about half an inch or slightly more lef ... more

done

qualcast classic petrol 43S , blades turn but no drive to roller ?

My mower starts first time,every time. The cylinder blade turns, as it should, but the roller doesn't turn.so there is no drive.I've adjusted the belt tensioner cable to no effect.

done

spark plug gap?

Qualcast Suffolk Punch what should the spark plug & Gap be

done

motor will not run?

iswitched on the safty button and switch lever of my qualcast fastrack32 mower and a puff of smoke appeard from the motor area why ?

done

Qualcast Concorde 32 electrical puzzle. Intermittent operation?

Started cutting out intermittently. Took it apart and checked each component separately. All cables ok. Motor runs when connected to different supply and switch bypassed. Switch works when fitted to ... more

done

Blades?

How do you change the blade of a Qualcast Turbotrak 35

done

Qualcast Trojan Not Starting?

Qualcast Trojan 16, Will Not Start, Tries, Then Kicks Back, New Key Fitted In Flywheel, So Timing Is Correct, Spark Is There, & Fuel Is There, Any Ideas ???

where can I get a new battery for qualcast trimlite 23 ?

where can I get a new rechargable battery for qualcast trimlite 23?

done

Qualcast Trojan starter cord snapped?

Hi all, The rip cord with toggle pulled to start up the engine has snapped. I've taken the metal cover off the top of the engine (can't tell what make it is - no name but I assume its a Techumesh o ... more

done

Earth fault on petrol engined lawn mower?

I have a Qualcast Suffolk Punch petrol driven lawn mower. I cannot get a spark from the plug even though it is brand new. I had an an identical problem a couple of years ago and the dealer repai ... more

done