Locating relay?

Location of the relay for the radiator fan 1997 Mazda 121 metro 1.3lt

how can i fix my baxi 105e boiler?

when in radiator+hot water mode everything is ok until I turn on hot water tap.the system switches off and I have to reset to make it work again.doses anyone know the fault?

lights come on but does not heat up?

Delta oil filled radiator - lights all come on including heat setting but no longer heats up

combi oil Worcester greenstar heatslave 12/18 switches off?

I have a internal combi oil Worcester greenstar heatslave 12/18 Its has a built programmer and Hot water temperature control and Central heating temperature control dial both marked from 1 to 6. ... more

done

Oil filled radiator ?

Just stopped working, swan sh1015 and it's not the fuse.

done

How can I fix my Nissan almera tino s 03? ?

The heaters on my Nissan almera tino s 03 are not working properly they let a little bit of hot air out but only now and again. I have flushed radiator and they improved a little bit but still not wor ... more

home heating systems?

I have an 12 yr old Highflow Electronic system, which is working perfectly for hot water. However the heating comes on heats up some of the radiators and then goes off. The thermostat is connected t ... more

done

How to turn off timer?

Kingston panel radiator

What is wrong with my ravenheat white star combination boiler,?

I have a ravenheat white star combination boiler,it suddenly decided not to turn off,its on all the time,I have had to turn off every radiator which is ok in summer, but soon I'll need the radiators o ... more

done

Peugeot 307, water in footwell?

Not rainwater, water running down off central tunnel and collecting in foot wells (1/2 litre?) On 3 occasions so far. No loss of radiator or windscreen water. Anything to do with aircon?

how to fix a err 103?

I have an ariston clas he 24 combi boiler. I drained the system to add a radiator>filled system back up and bled now showing 1.5 bar but my boiler shows the error message 103(insufficient circulation) ... more

done

2004 rover streetwise 1.4 radiator bleeding?

does anyone know how to bleed a radiator imy car as above??

Boiler flashing 02?

Hi fitted 2 new radiators now boipwr is flashing 02 no water coming from hot tap 1 pipe to a radiator is hot but no where else vokera boiler

help how to fix or sort radiator downstairs being cold?

Glowworm beatacom 30c.2 rads upstars get hot both sides fully.but one downstairs cold.drained systym fully.refilled.bled all rads in order 1 in bathroom .1st bedroom.2 bedroom.then front room last in ... more

done

my wired climapro isnt working properly?

My glowworm combi ultracom 24cxi hot water is working fine. The boiler fires up to full capacity but when the tap is turned off the heating is just running at a low rate and the room temp is sitting a ... more

Several radiators don't get hot, why?

I have a radiator in the kitchen which does not ever get hot. Two other radiators in the kitchen do. I have bled the radiator and it is full of water, no air. Is there a way to test the thermostat val ... more

done

Baxi combi will not restart after changing radiator?

I have a Baxi combi 105E boiler and have fitted a new towel radiator.after refilling system (all radiators have been bled and pressure is 2 bar), system will not restart. I have a flashing alarm "low ... more

done

Worcester condensing boiler flashing blue light?

hi. I came home to my boiler flashing blue light. I noticed the pressure had dropped right down. I checked furthest away radiator and no air was in it. I then topped up the pressure to 1 and a half a ... more

done

Radiator only getting hot on bottom half?

I have a Ideal HE24 boiler that works ok but we have a 6 foot high towel rail in an upstairs bathroom that only gets hot in the bottom half, I have bleed it but no air comes out or even any water. All ... more

done

ideal logic combi 30 boiler f1 error?

I have bled a radiator, which has drained the pressure out of the system. I now have an F1 error message, which is not included in the manual - as it only starts at F2. There is no apparent pressur ... more

done