how to fix drive gear on a brother vx-1125 and get it timed again?

Hi My machine stoped winding my bobbing round. so after some stripping of the machine, have found that the screw came out of the drive gear. (which was white with little teeth) None of the gear teet ... more

done

Brother 840 punchcard gate peg problem?

Changed sponge bar and knits fine until using punchcard for patterning. Yarn gets around some of the gate pegs. Would love help to correct this problem.

done

Brother sewing machine vx-1125?

My bobbing is not going round and it looks like the needle is not going down far enough. From what I have read so far, I have figured out that this is probably due to timing on the machine. But I am u ... more

done

Garter Carriage will not do knit stitch only yarn over needles selected for?

GC will purl stitches but not knit. Have GC 89 on a Brother 940,have changed needle and tried different pattern number. On second row all stitches are dropped

done

Brother printing problem 2?

The problem I had with the paper feed on 220gsm sheets solved itself by changing the setting to 'any other glossy' but now it has started jamming again, using the same setting. Any other solutions ple ... more

lace carriage compatibility?

I have a KH940 brother and I have messed up with my lace carriage. What lace carriages of the same trade mark r compatible with my KM? I mean all standart gauge lace carriages fit in all standart gau ... more

done

Brother Printer problem?

I have a Brother DCP-J125 all in one printer and am trying to print on 220gsm paper but the sheets keep on jamming. The book states this weight will be accepted so why are they jamming? I have tried ... more

done

brother kr 850 doesnt knit to the end of row?

Hi. My brother kr 850 doesn't knit all the way to the end of the row. It stops about 20 needles shy of the end. Is this possibly a cleaning issue?

done

How to adjust seat angle on Cheney Liberty Stair lift?

I bought a used Cheney Liberty Stairlift 1988 vintage for outside. My brother I got it installed but the angle of the chair is slightly tilted. I know there must be an adjustment because I've adjust ... more

done

brother BC-2500 sewing machine?

bobbin winder runs 3-4 seconds and stops

The right hand prong on the power supply is pushed in?

How do I get to the prong to fix it. The machine is a brother se400 sewing machine

done

address of Crane & Viceroy?

my brother is seeking the postal address of Crane & Viceroy watchmakers

done

I have a brother 910 knitting machine. I had an error 555 code? Can it fix?

I used my brother 910 machine. It had a 555 code with a noies. Mànaged to fix it. Have now forgotten how to reprogram it. Any answers please.

how to adjust tension on reverse stitch Brother VX-1125?

Just acquired this machine but I can't seem to get the tension right on the reverse stitch - it's very loopy on the upper tension but the normal stitching is ok. Any ideas how I can adjust this or wi ... more

done

my brother 930 fairisle cams won't work seperately?

I have tried to jiggle the two parts and they are not joined at the top or sides; just at the bottom. I can't figure out where to put oil since there's no room under the buttons. Is there anything ... more

done

how can i fix my brother sewing machines ?

my brother sewing machines is stuck in reverse is there a way i can fix my self

done

Are there any Brother Knitting Machine Service Engineers in Cornwall?

Hi I have a Brother KH950i and all sorts of ribbers with it. I also have a KH 270. These machines belonged to my mother and I would now like to use them but they most certainly need servicing.

done

Bobbin tangle?

I have the Brother VX-950 sewing machine. I can't remember how old it is but it's at least 20+ years. I haven't used it very much. Everytime I start the thread becomes tangled in the bobbin area. L ... more

done

I have a brother PC8200 embroidery machine. How do I reset the machine?

How do I reset my brother PC 8200 embroidery machine? When it does the outline for the embroidery it does not line back up to finish the embroidery. it is a little outta line, I was told resetting the ... more

Manual for a brother vx-1125?

Has anybody got an address I can get a user manual for a brother vx-1125 sewing machine please - lent it out & they lost the book and all the bits not bolted down

done