Where is the safety switch?

I am trying to locate the safety switch on a snapper riding mower. It is a high vac and rear engine design. can any one please help me. My problem is that I am not getting spark. I have cleaned the fl ... more

done

where is the fuse ao a snapper riding lawn mower?

I can'tfind the fuse on my snapper it is suppose to have a 10 amp fuse

done

how do i fix my right flat right front tire on my snapper riding mower?

older model snapper riding mower. we tried to pump up the tire but it is too flat. If i can get a seal around the edge, i believe we could pump it up!

done

i have a snapper sr 825 riding lawn mower. it shuts off when cutting?

my mower cuts off when cutting grass higher than 2 or 3 inches. but will cut the grass if lower. what could be the problem?

done

no spark on older snapper rider?

i would like some input to my problem. i have a model 265x snapper rider with a tekumsa"SP" must be a 5 horse origional motor on it. i have no spark. the man i bought it from used it last season with ... more

done

How can I fix my snapper riding mower. It will not pull?

The fly wheel is not touching the drive pully on my older Snapper riding mower. There is about 1/16 of an inch clearance betowen the fly wheel and the rubber on the bushing on the axle. How can I low ... more

done

My Snapper S31S weedeater starts,revs up but quits?

When I push the primer button fuel spirts out the of weep hole on the carburator. The weedeater only runs as long as the fuel port has gas in it I guess. I choke it ,Prime it and try to start it. It f ... more

done

i have a snapper riding mower w/ some sort of slide drive how dose this wo?

i need to know how to repair/check the drive system on my snapper riding mower it is a 9hp 28" cut singel blade unit about 2002 modle. the park brake will release but it dose not move. it appears to h ... more

done

I do I install grease fittings in my snapper snowthrower?

Are the grease fittings metric or standard? I am missing 3 grease fittings. I tried to unscrew another fitting and it doesn't unscrew. How do I know what size to buy? Make: snapper heavy duty snow ... more

done

Snapper won't start?

My Snapper rider (Yard Cruiser with Joystick) just stopped running as I was cutting my lawn. It would not start, just silence. I replaced the selenoid, starter switch and the safety switch under the ... more

done

How can i fix my electric clutch on a Snapper 1855A?

My Snapper 1855A garden tractor's electric clutch quit working and i'm not able to use my mower deck, at least one more time this season. I don't know if i'll need it on the snowblower, but if i do, t ... more

done

Snapper Model # 30087BE 8HP lawnmower?

What causes the clutch pedal not to return? I have to lift it with my foot.

done

Snapper LE1438H starter won't work?

When I turn the key the solnoid just clicks... and that little deal under the float bowl clicks too. I removed the starter and it does work while on the bench. I replaced the solnoid already & no chan ... more

done

Snapper Comet drive slips on hills?

My dads' old, old snapper comet drive slips when climbing the slightest grade. I have inspected the drive system and filled all lubrication points to proper capacity. There seems to be no way to incre ... more

done

Do you have a diagram showing how to replace the belt on a snapper mower?

Do you have a diagram showing how to replace the belt on a snapper rear engine mower, (model SR120)?

done

Replacing Axle on Snapper Comet Riding Mower?

One of the bushings (left) needs replacing AND the axle broke when the left bushing allowed the axle to cut into the frame of the mower. What do i need to remove to get the axle off the mower? A ... more

done

How do I adjust the clutch on the snapper sr1333?

The clutch slips when going up hill or in sharp turns.

done

Magneto is not working (Snapper)?

I have no spark to my spark plug, I beleive that the magneto is bad. How do I test it/ or fix it? Snapper model 215014

done

How can I repair my snapper rider?

Hi, just power washer my snapper rider. Now when I take it out neutral or engage the blade the engines shuts off. Any ideas whats causing the problem?

done

snapper rear engine hit a root of a tree. oops?

I hit a root of a tree and now my blade turns freely even when ingaged. what should I do now with my rear engine snapper mower. p.s.Is it a sheer pin or something worse? How much to have fix aswell. T ... more

done