Snapper RP21600 cranks but won't stay running?

The only way to keep the engine running is to keep pumping the primer bubble. Sometimes the engine starts fine. Other times impossinle. Many times when it does start if there is a load of 1 blade of g ... more

done

How To Start a snapper Mower?

hi i have a old snapper mower thats been sitting in my backyard for about 8 or so years now it is a riding mower it has the engine on the back of it with a keyhole and a pull start but i dont know how ... more

done

HOW DO I PUT BOOTS AN RS120 SNAPPER RLM?

THATS IT HOW DO I PUT BOOTS ON A SNAPPER RS120 RIDDING LAWN MOWER I DONT UNDERSTAND GETTING THE WHEELS OFF AND THE AXLE OUT TO REPLACE THE BOOTS

done

whats wrong with my engine?

i have a briggs engine it won't start.i have replaced spark plug rebuilt carb checked valves for sticking the engine has good spark gas coming to carb.i also replaced gas line and filter the engine se ... more

done

snapper lawn mower runs but will not move into gear?

The mower runs but will not move when put into gear. I would appreciate any ideas. Thanks

done

need diagram of snapper riding mower carb/fuel 12hp 1990+- Series 3,4,5-/+?

I am having problems where gas is leaking from my mower. The Fuel tank and filter and tubes are intact but there is a leak under the air filter /

done

Snapper 1855A with Onan carburator problem?

I have a Snapper tractor 1855A with a Onan engine that seems to lose power when engaging the mower and the transmission. I've taken the carburator off and everything seems OK. Except from the tank the ... more

done

how can i fix my snapper riding lawnmower?

does not want to start with the key and i have no wireing diagrams. it is a snapper28" #sr1028

done

diagram to replace a drive belt?

I need a diagram on how to replace a belt on my Snapper riding lawn mower, it is a older model and carry a belt size approx. 68 in. in length. my mower is about 10 years or more old and got a 11 horse ... more

done

How do I adjust the drive disc on a Snapper riding mower?

How do I adjust the drive disc on a Snapper riding mower ?

done

How to changed the blade in rear engine riding snapper lawn Mower?

have a mulcher blade.My email is Jayatibbs@netzero.com Please write me or advised me. My riding lawn Mowers is very old .It is 8horse power and i bought in 1978 or1980.

done

how to tighten the belt on a lt16 ,84 snapper lawnmower?

how do i tighten the new belt to loose jump never had abet to jump off before.

done

Snapper LT16 brake adjustment?

Can anyone tell me how to adjust the brakes on a 1984 Snapper LT16 riding mower? Thanks

done

snapper push mower will start and run a second or 2 and cut off?

Have a snapper push mower that sometimes will start for a second of 2 and then cut off. Sometimes this happens and sometimes after enough times of trying to start it, it will actually run for a while ... more

done

wiring a snapper rider?

I have a older snapper rider mower in parts, need to know where all the wires go to make it run and stay charged;wiring diagrams red blue black yellow brown white? all good parts just need them back t ... more

done

why wont my snapper lawn mower keep running after it starts?

I bought a lawn mower (snapper push 5 horse six speed )at a garage sale and I put fresh gas in it.There appeared to be no gas in prior to me doing so and I checked the oil which was fine. I made sure ... more

done

Snapper 41 inch riding mower with disk drive will not run in reverse?

I have found it impossible to ajust the disk drive on the 41 inch Snapper mower so that it will run in reverse gear and still have appropriate speed in forward gear. I have replaced the disks in the ... more

done

snapper self propelled rolls 6" then locks up, lifted,it posi's?

I have a 91 snapper self prop mower. It was sitting for a while. I try to roll it, (not started) and it acts like the differential is stuck . it only rolls back and forth about 6" lock to lock...

done

How to Change a blade on a rear engie snapper?

I just got an old rear engine riding lownmower made by Snapper. And I wonder how to change the blade can I stand it up on the back wheels and do it after I losend the blage nut?

done

how does the axle on a snapper mower work???????

a am wondering how the axle moves when started and put in go

done