How to fit new seal on hoover washer/dryer?

I can’t get a new seal to fit on my hoover washer/dryer it’s an integrated one how do you get the front off it seems to be in one piece including the sides model hbwd 85414d -80 31800308

done

Indesit wd11 wont start wash or dry cycle?

My indesit wd11 washer dryer doesn’t start. I have put on desired settings and then when clicking the on button it flashes very quick for a second or two then stays on for a while and nothing happen ... more

done

I have a AEG L75480WD washer dryer fault pnc: 91460660500 th?

I have a AEG L75480WD washer dryer fault pnc: 91460660500 that is faulty. The unit over 10 years old. The fault code showing is E66. If the code is attempted to be reset this trips the RCD in the c ... more

done

Zanussi washer/dryer Mod. Z716WT83BI Error code E73& no heat?

Hello I have the Zanussi washer/dryer Mod. Z716WT83BI 914606600 01 I took the top off the machine to clear out the condenser of lint as shown to us by engineer last year when we had an issue of the ... more

Maytag LSG1000 Dryer making noise?

Maytag LSG1000 stack washer/ Dryer - - I replaced the belt on my LSG1000 recently and now the dryer makes a "rubbing/ grinding" sound when the drum is turning. I think I have narrowed it down ... more

Dryer option not selectable on Hoover wash/dry WDYN 9646G-80?

I have a Hoover sensordry washer/dryer, model no WDYN 9646G-80. I can select all of the different wash cycles but I cannot now select the dryer only cycles. This has happened since I had a new combi ... more

Miele WT2796?

Miele washer dryer has a message “FAULT 55”

done

Hoover washer dryer?

Hoover washer dryer wdxa496a is not drying and stops after a few seconds

Washer dryer?

Washer dryer wdxa496a it is not drying and stops after 5 seconds

NEFF wash dryer washing machine?

have a code error E11 on my NEFF washer dryer what does this mean and how do i fix it

done

Noisy Hotpoint Aquarius WDAL 8640 Washer Dryer?

Hi - my Hotpoint Aquarius WDAL 8640 Washer Dryer (about 5 yrs old) is making graunching noises BEFORE the spin cycles - its intermittent and has been going on for about 3 months but is very loud - dur ... more

Hotpoint WD865A stopped mid wash. 8pin chip U2 blown its to?

Hotpoint WD865A Washer Dryer.Just stopped mid wash. Plug,fuse ,mains filter OK. On Main Board IC U2, an eight pin DIL chip, had blown its top!! Probably a low voltage SMPS chip?? But only mark lef ... more

done

Indesit washer dryer?

Indesit washer dryer stopped mid cycle with water in it. how do I drain the water out

done

Siemens Washer-Dryer WK14D541GB?

I have a WK14D541GB washer dryer. When we transferred from wash to dryer it made an awful cranking noise so I paused the machine and took the wash out. Then a triangle with a line thru the middle a ... more

Configure Zanussi PCB?

Hi I have a Zanussi WJS-1265-W washer dryer and need to configure the PCB. I saw an excellent answer for a similar machine but it is not quite right for mine. Steps I believe are: 1. switch on with ... more

done

How do you take the front panel off an AEG washer/dryer?

Intergrated machine, have dropped the door back plate into the bottom of the machine and need to get the front panel off to retrieve it

done

how can i fix my indesit washer dryer IWDE126uk?

my Indesit washer dryer iwde126uk door wont close, the catch has fallen into front of machine

Fabric conditioner not emptying?

I have a Hotpoint washer/dryer(Aquarius WDAL8640). The fabric conditioner is not emptying. I have removed the compartment and washed it. Tried to skewer the deep hole below, and put hot water down, bu ... more

done

Intellowasher vs direct drive ?

Hi, I have a purchase question. I am buying a second hand LG washer dryer combo tomorrow and have a choice of 2 different units. The one is a LG Intello washer 7.2/3.6kg and the other is a LG direct d ... more

done