zanussi ds11 pump still going even when switch is off?

my zanussi ds11 dishwasher was working perfectly then it would not turn off. the motor still is running and the water pumping in even if the switch is off. when i switch off at the mains then it goes ... more

done

Zanussi TD520 Element or Thermostat?

Hi our Zanussi TD520 has stopped blowing hot air, any idea how to tell if its the Element or Thermostat? If not whats more likely? Thanks Brian

done

How can I fix my Zanussi TC 481W tumble Dryer?

The drum does not go round to dry clothes properly. Everything else seems OK.

done

Error code E20 on Zanussi Jetsystem 1200 XC Model FJR 1254W?

I have a Zanussi Jetsystem 1200 XC model FJR 1254W which stops several times during the wash program and displays error code E20. It always seems to stop when it is trying to empty. Can anyone confi ... more

done

Zanussi de6744 dishwasher not heatng water cycle keeps going?!?

Zanussi de6744 dishwasher, was working well since i repaired the PCB about 6 months ago, but now the water will not heat up and on occasions the cycle keeps going. on the limited research ive done the ... more

done

how can i fix the pump on a zanussi nexu fl1884?

it is not draining water, how can i mend it

done

Electrical fault on Zanussi DWS939 dishwasher?

The appliance stopped during a recent wash and even the red "ON" light extinguished. I do not have an electrical schematic in order to look for a fuse or relay in the system. I have checked the plug a ... more

done

Noisy bearing on Zanussi FL811?

What is involved in replacing the drum bearing(s) on a Zanussi FL811 washing machine? Does the drum need to be removed? If so does it come out of the front, back or top? Thanks

done

Manual for a Zanussi DE 4744?

I have acquired a second hand dishwasher DE 4744, and I would like to get hold of an instruction manual for it. Can anyone help? Philip

done

Have you a picture of the way the drum belt fits the Zanussi TC481W?

Have you a picture of the way the drum belt fits the Zanussi TC481W?

done

my zanussi tumble dryer TD62,?

the tumble dryer will not heat up, but is spinningo.k. it is about 12 years old but until last week has been working perfectly. Can I change the element to make it heat up?

done

Zanussi WJS1397 'clicking on' and not stopping at end of cycle?

I have a Zanussi WJS1397 Washer Dryer. What it will and wont do is very unpredictible. It mainly clicks on, at about 2 second intervals, through the program and only stops at Q (end of a woolens wash) ... more

done

Zanussi aquacycle 1000 Drainage problem?

I have a zanussi 1000 just over a year old and it wont empty the water. I have checked the normal filter and its ok. I have tried different cycles and this too does not help. Any ideas out there...? H ... more

done

how can I fix a door seal to a Zanussi washing machine FJ1295?

I need to replace a door seal on my washing machine Zanussi FJ1295 Can anyone advise. Thanks

done

how can i fix my zanussi tc481w?

how do tighten the drive belt on a zanussi tc 481w tumble dryer

done

washer zanussi fla1001w?

clonking when spinning need to check bearings. how to get to bearings?

done

Noisy Zanussi FJS1397W?

My Zanussi machine is getting noiser by the day when spinning. I can move the drum forwards a couple of millimeters so I'm guessing either the bearings are dying or something is loose. I can't find an ... more

done

How can I get the back casing off my Zanussi aquacycle 1000?

There seems to be something wrong with the drum as its won't turn properly, we need to get the casing off to see if anything is stuck behind the drum. When I emptied the filter it looked as though it ... more

done

how can i fix my problem zanussi aquasave dws 939?

when i try to start the dishwasher, it just cuts off the mains electricity of the house, why does it do this and what may be the problem??? the wires seem fine and the pipes for the water is not block ... more

done

How to fix my Zanussi ZT685 dishwasher?

The power light is on, but you cannot select any of the wash cycles - nothing happens when you press the buttons. I've replaced the control panel with a new one (not cheap) which allowed me to run ... more

done