Zanussi Jetsystem 1400 Dead?

The washing machine has no power, have checked mains fuse and suspect a circuit breaker has tripped or internal fuse blown. can any one point me to the location of the curcuit breakers ect

done

zanussi tumble dryer TD 520?

HOW TO REPLACE BROKEN DOOR CATCH ON A ZANUSSI TUMBLE DRYER MODEL # TD 520 THANK YOU.

done

Zanussi dishwasher keeps stopping on alarm 5?

I have a zanussi aquasave des959 dishwasher but it keeps tripping out on alarm 5 which i know is connected to water. I have rung up the manufacture but they say my pressure valve requires changing. Ca ... more

done

zanussi 1250 - how do i remove the water pump?

The washing machine will not drain. I've checked the hose ok. Either the pump is blocked or not working. How do I reomve ths pump?

done

ZANUSSI JETSYSTEM 1200 XC?

FAULT E10 EVERY WASH CYCLE

done

Zanussi Dishwasher DE6744 keeps triping out the electrics?

My Zanussi Diswasher DE6744 has started to trip out the electrics on the mains circuit board when carrying out the drying cycle. Please could uou advice to the problem and if necessary tell me how to ... more

done

How can I get my Zanussi FL1023 washing machine to start?

The washing machine loads with water. Then there are various click sounds but no rotation of the drum. The nameplate says it is a Mod # C81656 L.

done

ZANUSSI AQUACYCLE BEEPING?

ZANUSSI AQUACYCLE BEEPING at end of wash but lost manual tried cleaning filter at the bottom but no help

done

how can I replace a drum belt on Zanussi TC460 tumble dryer?

I have a replacemet belt but either it is too big or I do not have it threaded correctly, as it is too loose to turn the drum. It currently is around the drum and drive shaft and the bottom portion pa ... more

done

how can i fix my zanussi jetsystem 1000?

how can i fix my zanussi jetsystem 1000 it has frozen on 36 minutes left into a 40 degree cotton wash bleeping and the numbers e 20 appearing on the display? pleeze help

done

How can I fix my Zanussi Jetsystem 1200?

How can I fix the soaptray on the machine. The machine does its full cycle, but most of the powder remains in the tray.

done

zanussi error code E20?

My zanussi washer dryer is reporting E20.The machine is half full of water and I can't get it to empty without opening the door and spilling the contents everywhere. Does anybody know of a fix or do I ... more

done

poorly Zanussi FJ 1214 washing machine door seal?

Ok, this maybe a mistake for me to try it, but I want to replace a torn rubber door seal on my zanussi FJ 1214 washing machine. I've got a new seal but my manual doesn't address how to fit it and I c ... more

done

HOW CAN I REPLACE THE REAR DRUM AND INNER DRUM BEARINGS ON MY ZANUSSI?

HOW DO I REPLACE THE REAR DRUM AND INNER DRUM BEARINGS ON MY ZANUSSI FJS 1225 W (JET SYSTEM 1200)WASHING MACHINE

done

Zanussi JetSystem Excel 1250 lights on nobody home?

all plumbed in fine, red light on for the washing cycle but nothing happening. when you try to use the washer or dryer nothing happens at all. HELP?

done

Zanussi DES 959 Alarm Code AL3 what does it mean?

My Zanussi DES 959 keeps stopping with the alarm AL3, I have tried un-plugging it to do a reset but dosn't help. Any ideas on what this alarm means so that I can fix it?

done

My Zanussi washer/dryer stops before spinning?

Error 90 appeared and used the great fix by so many helpful people. Now it fills, drains and then the start light flashes and it won't spin. Motor all ok, pumps stripped and cleaned, but they do sound ... more

done

How does the spring mechanism fit on a zanussi door catch?

I suspect that someone attempted to open the washing machine whilst the door lock safety mechanism was still engaged and has sprained it. The lock can be disengaged using a knife to push back the lock ... more

done

replacing drive belt on zanussi TC485W Condensor dryer?

How do I replace the drive belt on my Zanussi TC485W Condensor dryer.

done

zanussi tc481w problem after belt replacement?

After fitting a new belt and pushing the motor to the left to tension the belt, I turned the machine on and immediately the motor moves across to the right slackening the belt and hence no turning of ... more

done