Zanussi Aquacycle 1000 F1045W Not draining. No water reaching drain pump?

Zanussi Aquacycle 1000 F1045W. Water in drum does not drain at all. All other programs working. No water reaching drain pump but the pump motor runs ok. Filter is clear. Where is the blockage?

done

Zanussi FL1082 washer drum bearings?

is the method of drum bearing removal the same as for the zanussi aquacycle 1000?

done

why does drum fill with water on zanussi aquacycle 1000?

when machine is not in use drum still fills with water

done

zanussi aquacycle 1000?

The door solenoid is making a clicking noise but after 3 clicks it the starts the beeping noise off. The machine has water in it and wont move on to the drain cycle but instead does the above. I have ... more

done

Zanussi Aquacycle 1000 fault?

I have a zanussi aquacycle 1000, when starting the valve opens and allows water in approx 1.5 inches in the bottom of the drum then goes no further. If I reset the program when in this state without ... more

done

Zanussi Aquacycle 1000?

when I start my aquacycle 1000 the inlet goes to open then shuts immediately and won't go any further. i once managed to get the machine to fill on the pre-wash cycle but then wouldn't go any further ... more

done

drain , spin cycle the machine starts making a binding noise?

Hi, Zanussi zt 1012, aquacycle 1000. when on drain and spin cycle the machine started to make a binding noise , stopped machine, emptied and noticed drum quit stiff to turn. (more clockwise the probl ... more

done

Zanussi Aquacycle 1000?

will it work with just the cold water hose attached and not with the hot water hose?

done

my washing machine is not draining properly?

i have a zanussi aquacycle 1000 washing machine it is washing the clothes fine but not draining the water when finished how do i go about repairing it.

Zanussi Aquacycle 1000?

Hi My machine locks yat will not fill at start of cycle, appreciate any advice. Thanks

done

Zanussi Aquacycle 1000,Is this spindle too corroded? ?

FLA1001W (91478058900) I've finally taken it apart and found the front bearing in pieces but i'm concerned about the spindle. www.hallowpark.co.uk/imgp3554.jpg Can any one help Thanks Jon

done

Locked Washing Machine Panel?

I have a Zanussi Aquacycle 1000 XC, and the panel has locked due to an internal leak. The leak is fixed, but how do I unlock or reset the panel please? There is talk of a 'code', but I have read her ... more

WASHING MACHINE ZANUSSI AQUACYCLE 1000?

DOES A ZANUSSI AQUACYCLE 1000 HAVE A COLD WASH CYCLE?

done

can I fix my zanussi aquacycle 1000?

It is 8 years old and has started to make a grinding noise and leak from underneath when spinning

zanussi aquacycle 1000 front seal?

i had a screw in my zanussi aquacycle 1000, it was between the drum and the outer drum, i removed it by taking the drum apart and now i can't get the seal on the front back together, the seal is attat ... more

done

zanussi aquacycle 1000?

i had a screw in my zanussi aquacycle 1000, it was between the drum and the outer drum, i removed it by taking the drum apart and now i can't get the seal on the front back together, the seal is attat ... more

done

how do i get the seal back on my zanussi aquacycle 1000?

i had a screw in my zanussi aquacycle 1000, it was between the drum and the outer drum, i removed it by taking the drum apart and now i can't get the seal on the front back together....?

done

Zanussi aquacycle 1000. Water leaks out of the filter draw?

Alot of water is leaking out of the filter draw when I run a wash. I've cleaned the filter and no difference. Any suggestions?

done

zanussi aquacycle 1000 motor removal?

The drum isn't spinning on my Zanussi Aquqcycle 1000 washing machine, so I presume the brushes need to be replaced. I've removed what I thought were the four screws holding the motor in place but it w ... more

done

Drum bearing on Zanussi Aquacycle 1000 Washing Machine?

Is anyone able to provide instructions or guidance on changing the drum bearing on a Zanussi Aquacycle 1000 washing machine?

done