How does the switching mechanism fit together in JCB M25?

Can you show me the switching mechanism inside the JCB M25 petrol strimmer

JCB trimmer?

My JCB plt25 trimmer will not prime the carburetor

Where can i get a pull start and pawl for a JCB petrol strimmer?

Does anyone still supply pull starts and pawl for a JCB strimmer?

Handle?

Trigger assembly? I have a jcb m24 hedge cutter and the trigger assembly is in bits and I am bot sure where to put the springs for the trigger to bounce back

trying to replace throttle trigger return springs m24 jcb hedge trimmer?

had side cover off to see what was wrong . touched trigger . springs and trigger fell out. the machine is a jcb m 24 hedge trimmer dont know how to put it together again.

2013 jcb js130 ?

My jcb 130 digger is coming up with 139 cushion fault and a buzzer sound every 2 mins. Any help would be great. Thanks

done

Can not open casing to pull more line out?

Hi. The line on my JCB strimmer has gone back inside the casing but I can't open the casing to feed out some more line. I have the gadget to open it but it just wont open. can you help me please.

530-70 Jcb ?

Hi I have Jcb 530-70 and some how it has a streeing problem when in 2 wheel streeing is ok when in 4 wheel streeing it's like it's going in to crab streeing iv nut new sensors on and new relay boxs st ... more

how can i get my JCB trimmer to start cutting again?

my hedge trimmer has stopped cutting but the blades still move

done

How ca I fix my jcb js200sh excavator ?

I have a JCB Excavator js200sh full electric control, I have a problem that., when I start it it gain 1800 rpm after few seconds (5 to 10s) it dropped ti 1420 rpm due to low power indecent on the s ... more

done

Trigger assembly?

I have a jcb m24 hedge cutter and the trigger assembly is in bits and I am bot sure where to put the springs for the trigger to bounce back.

done

how do i change the cord on a JCB PLT25 ?

I recently bought a JCB PLT25 petrol strimmer, the cord needs replacing, i have no manual and cannot seem to get the spool to release and let me replace the cord. Any help would be welcome as i need ... more

JCB wont go in reverse?

I have a JCB 215 series 3 backhoe that wont go in reverse i have no shop manual so i dont know want silinoid is which the only number I found is stamped in to the frame its 0471038 is this the serial ... more

JCB JS 130 Excavator Fault Code 131?

We had our JCB JS 130 Excavator steam cleaned and now it is throwing out a fault code 131, and will not move forward or backwards. It starts and runs fine, it just will not move. Does anyone have any ... more

need battery charger?

battery charger for 14-4 drill and jigsaw JCB on box is the product to old for spare part. thank you

replacing the diaphragm on my techumseh engine fitted to my jcb rotovator ?

how easy is it to replace the diaphragm on my techumseh prisma37 3.5hp 4 stroke engine fitted to my jcb-c35 rotovator. Engine starts but will not run. any help would be appreciated

done

Hammer drill rewire?

I have a JCB hammer drill HD 1010 with worn mains cable. I have stripped back the old and like an idiot didn't note the neutral and live. Could you please help?

done

Jcb ram seals?

1986 3cx. I need to re seal the 4in1 rams. I am told there is a locking pin which has to be removed in order to dismantle. I can't see anything in the cap, so I assume is to do with the piston. Can ... more

done

JCB 1990 3CX not moving forward/backward?

Hi, I have recently bought a 1990 JCB 3CX without Gearbox and restored it with the gearbox and all other necessary parts, The engine works fine and hydraulic system is also working good. But when ... more

done

Jcb 3cx transmission?

"Hi I have a 3cx using today until I parked it up..only to see transmission fluid pouring from bell housing and engine..machine would not move, fluid gone from box resovior..is converter gone? Etc..

done