Simpson esperit 750 stops at spin cycle?

Hi My Simpson 750 esperit wasing machine stops at the spin cycle mode? Any ideas? Regards Brett

done

aeg lavamat 86720?

when on spin cycle,there was a smell of burning rubber then it blew mains fuse,have you any idea of the problem,Ian

Bosch dishwasher?

It takes in some water but only enough so I can just see the water level above the filter. I'm sure it used to get quite a lot in the base (about 5-6 cm. deep) The arms don't spin around but water pou ... more

done

how can i fix my simpson eziset 605?

on wash cycle machine will not spin and rinse..i have to do this manually..can you help

I have error code E13 on my neff washer-dryer V6320X0GB/01 about 6yr old?

The error code appeard toward the end of a washing cycle. I turned machine off at mains then turned on. E13 vanished. As it looked like there could be water in the machine I selected rinse/spin cycle. ... more

done

Washing machine Bosch 2200 WKF?

Washing machine goes straight to spin cycle when turned on

how comes spin cycle is not working, belt is not broken at the rear of dru ?

spinning cycle not working but noise function still comes from machine. Belt at rear of drum still attached but drum not going round on spin.

Bosch Washing machine - Drum does not rotate?

We did a 2nd wash this morning (the first was fine). When the cycle had finished we went to empty the contents only to find they were sopping wet. We then selected spin only and noticed there was n ... more

done

Burning smell in tub?

I have aKenmore Ultra Fabric Care 80 series washer.A burning smell is coming from the tub when in spin and rinse cycle and also is very loud. It runs normal when in the washing cycle. Any possible ans ... more

Beko dsc85w only heating on the first spin?

Hi, I have a Beko dsc85w . I have replaced the heating element, after fit the new element, I pressed the start button for about 3 sec to reset the cycle. when I start the new cycle to test I notice ... more

How can I fix my Fisher&Paykel washer model#WA37T?

Washer keeps stopping at the spin cycle won't drain and alarm keeps going off. Model # WA37T does this model have a coin trap, and if so where can I find it?

done

f&p Washing machine keeps stopping on the drain cycle?

the pump pumps water then stops and all lights go off no button works if I turn it off at the wall and wait for 5mins and then turn on it resumes draining water and then after a short time stops. when ... more

done

How can I fix my Zanussi WDT 1085 Program selector knob?

I'd be really grateful for any help! I have a Zanussi WDT 1085 washer dryer. Yesterday I went to set it to a spin cycle and the programme selector knob broke. Knob still worked, but the dial around it ... more

clothes still wet after spin cycle?

Washing cycle is fine. Spin cycle works but clothes feel hheavy and wet after cycle.

Kitchen AID Washing Machine type 111?

will not go into spin cycle

How can I fix my Fisher & Paykel top loader washing machine model # GW709Au?

After being left outside in the weather for a few months I retrieved it and left it overnight before switching on my Fisher & Paykel GW709AU TOP LOADER WASHING MACHINE. When I plugged it in and switch ... more

done

how can I fix a poor spin cycle?

The clothes aren't coming out as they used to. Do the belts need replacing or is it something else?

done

how can i fix my washer?

I am getting an error code oe on lg front load washer. At first would not drain after wash cycle, so I have taken out drain pump and disconnected and made sure no blocks in pump or lines, so I put o ... more

done

Dishdrawer F2 though rotor is fine?

Getting the F2 error so swapped rotors from each drawer but still get the error. The rotors look fine and spin freely. If I get the drawer free of water then the cycle works until it comes time to ... more

done

washing machine wont turn on?

washing machine ran a spin cycle but before finished lid was opened and now wont turn on no lights or sound

done