How do I stop strobe lightflashing on Scantronic 9448?

While not set, my alarm went off due to a power cut. Initially I was unable to turn off the alarm even when entering the code. After I removed the external housing of the external alarm box, the s ... more

done

Is my alarm system dependent on the battery ?

Just before going on holiday I noticed the tamper light on my Scantronic 9448 system glowing slightly. On arrival home the whole system was down with no power showing. I was under the impression that ... more

done

Scantronic 9448+ goes off before fully set?

Following a power cut in the village the alarm triggered. When the power came back the alarm was reset using the key pad. Since then although the system shows normal on keypad, on setting alarm the ... more

engineer code for 9448?

I would like to know the engineer code for a Scantronic 9448+ system-anybody able to help?

scantronic 9448 touble shooting?

basically my fuse was broken came on a site like this and asked what i needed they told me 1 amp put it in it went off but blew - not suprising as i needed a 10 amp, ordered some put it in .... nothin ... more

done

How can i fix my scantronic 9448 home alarm system?

The electrics tripped out in my house and the alarm system went beserk - firstly the internal alarm noise, then the external alarm noise, eventually i managed to stop it by entering my user code - but ... more

done

Scantronic 9448+ Box?

Had an alarm and then subsequently entered code to turn off. This turned off the internal sounder, but thebox runs on with both mains and battery disconnected. Is there any way to turn off box sounder ... more

done

Howan I reset Alarm 9448 Scantronic?

Previous owner of house we have bought did not leave the code for the Scantroni 9448 alarm. Can someone advise how to reset to Factory settings please.

done

What fuse is needed for a Scantronic 9448?

I've recently moved into a new house and the one thing i want to work .... dont!!! we know its the fuse that needs replacing but i have NO idea were to get a replacement or what it is ... all i kno ... more

done

fitted new battery what next for scantronic 9427 panel 9448?

alarm was going off all day battery went flat and would not recharge, I have replaced the battery and the box outside is flashing what do I do next.

done

scantronic 9448 panel is dead after alarm going of all day?

can not rest alarm on my scantronic 9448 power is ok battery is dead but front panel 9427 has no lights

how can i fix my scantronic 9448?

i attempted to change the number of are alarm as the number 0 has worn and its not working we have had it over 15 years .the tamper light is on and zone 1 light is flashing and the day one is on what ... more

Tamper light on. How to I reset it?

Scantronic 9448+. Tamper light came on. How do I reset it?

Scantronic 9448 - I want to turn mains off?

Hi - seems a strange question but one of my sockets is not child-proof, resulting in my broadband and computer equipment being turned on/off 10 times per day. I want to change the socket for a safer ... more

done

how to reset tamper on alarm?

Having difficulty reseting tamper on my scantronic cooper menvier 9448+ house alarm. I had a few days power cut and the back up battery ran out.

How can I fix my Scantronic 9448+ alarm?

I have a Scantronic 9448+ alarm. The lounge movement detector fell off the wall. On refitting, the "tamper" condition prevented me from putting my access code in. What do I have to do? I have tried ... more

How can I programme my 9448+ scantronic alarm to be quiet on setting?

My scantronic alarm 9448+ is so loud whilst counting down. Is there anyway it can be programmed for silent countdown.

done

Home Alarm Systems?

i have scantronic 9448 for garage . fitted pir on enty & axit but alarm wont set do i need door magnet cencers or do you think pir is broken

done

scantronic 9427 keypad sounder?

Hi all, I have install a 9427 keypad to a 9448+panel every thing seen's working fine ,But when the alarm go's off only the 9448 panel internal sounds & nothing from the 9427 keypad, keypad sounds whe ... more

done

red light is on just below no 6?

my alarm is 9448+ scantronic and red light is on just below no 6, cannot key anything onto keypad and system does not work. Power supply has been checked by electrician. the red light symbol looks l ... more

done