Scantronic 9448+ alarm beeps every 15 secs?

The external bell for my Scantronic burglar alarm keeps making a single beep every 15 seconds. The alarm itself seems fine, no tamper lights showing and all PIRs work ok. I've opened up the control pa ... more

done

do i need a certain door contact for my alarm system?

my current alarm system is a scantronic 9448+, recently i damaged one of my door contacts and need to replace it. can i use any simular product or must it be scantronic product only.

done

Scantronic 9448 Tamper Light?

I have recently moved into a house with a scantronic 9448 alarm system. Unfortunatly my dog ate through one of the door sensors, so I have replaced this, and also replaces the battery which was dea ... more

done

Scantronic 9448 tamper alarm keeps going off?

Hi, My alarm has been working well for years and all of a sudden the tamper alarm has been going off when the alarm hasn't been set (but also happened when it was set) e.g 1. I'm in the house ( ... more

done

Power loss to whole system?

Hi, Following the gales on Sunday night I have got no power to any part of my Scantronic 9448+ alarm system. I replaced fuse. No power still. Can anyone advise what might have happened? Do you think i ... more

done

Scantronic 9448 Faulty following severe HV voltage drop?

My Scantronic 9448 Control Panel (Approx 15 yrs old), no previous problems, developed a fault during a voltage drop from 230v to 80v for 12hrs, during gale force winds. During this time it screeched a ... more

done

Scantronic 9448 tamper fault?

During a recent power-cut the alarm system failed with a tamper fault. the key-pad wasn't illuminated and I wasn't able to enter my code to silence. The battery failed which wasn't a surpise as it was ... more

done

scantronic 9448+ tamp light?

fault with unit or product? tamp light stays on ,on key pad 9427 have tried ov/tr and glob tamp links any ideas

done

how can i set my alarm and give it a new code scantronic 9448+?

ive cut some wires which set my alarm off. i connected the wires again and replaced a fuse but i cannot set my alarm anymore. is there a factory setting code .nothing happens with my code

done

Random Alarm have Scantronic 9448+. It has been installed for last 6 years?

I have Scantronic 9448+. It has been installed for last 6 years. Recently the panel goes into alarm wnen not armed for few seconds and reperets this every 5-10mins. there is no indication on display ... more

done

how can i reset scantronic 9448+ after the wire has been cut?

on the box it says its 9448+ on the box that you set the nubers on it says it a 9427

done

how can i fix my alarm? its a scantronic 9448+?

Hi, I've got a scantronic 9448+ alarm and its been in for just over a year now and have just encountered a problem!! when i trigger the alarm and dont enter my code the internal alarm goes off but my ... more

done

Scantronic 9448+ Move a detector?

I have just purchased the house and need to move a detector, but cannot see how to do it with out setting off the tamper alarm. The instructions does not mention anything about this only omit a det ... more

done

Scantronic 9448 stopped working?

Had it 2 years, this morning it woke me up as it was going off (thought it was the cat). Now it has a flashing top light and when I try to set it the top 3 red lights flash and it fails to set. It i ... more

done

why does my scantronic 9448 go off on power restore?

my 9440 goes into full alarm condition when not set ,but after a powercut.The alarm goes off when power is restored.

done

how can I fix my scantronic 9448+?

I have just moved into a new house that has this secruity alarm fitted, I am wanting to use it as it works because when you put the fuse in the alarm sounds but I don't have a pin number for it. Could ... more

done

Replacing battery on Scantronic 9448 system?

During a recent power-cut the alarm system failed with a tamper fault. the key-pad wasn't illuminated and I wasn't able to enter my code to silence. The battery failed which wasn't a surpise as it was ... more

done

Replacing battery on Scantronic 9448 system?

During a recent power-cut the alarm system failed with a tamper fault. the key-pad wasn't illuminated which makes me think that the battery has failed so I am planning to replace. What steps should I ... more

done

How can I stop my alarm bell from sounding (Scantronic 9448)?

The external alarm bell/siren sounds continuously with no evidence for an alarm condition showing on the control panel. The only way to stop it is to cut the power supply and disconnect the battery. ... more

done

How can i crack my Scantronic 9448 alarm?

I recently moved into my new home and i cannot get the system working due to not having the code.

done